Ice Watch Charging Cradle - Free 3D Print Model

Search models, users, collections, and posts

RC Eng

Tools>Gadgets

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

43 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

The default charging cable of this watch has an issues for me. The cable is so rigid that the magnetic connection was constantly coming loose. This meant that reliable charging of the watch was not guaranteed.

The solution for me is this charging cradle. It has a recess in the shape of the watch so that it can be inserted quite precisely, as well as a fixation for the charging cable. This allows you to simply place the watch in the recess and the magnets connect the charging contacts.

Usage:
1. Print the cradle
2. Remove the supports

3. Place the watch in the cradle

4. Connect the magnetic connector to the watch. Now you know the correct length of the cable.

5. Push the cable carefully into the cable routing in the bottom. This Will keep the cable in place.

6. Connect the loading cable to your chaging device (USB side).

7. Place the watch in the cradle (you should hear the magnets closing the connection, the watch should start charging)

BE CAREFULL WITH THE CHARGING CABLE! USE THIS 3D PRINT ON YOUR OWN RISK!

Comment & Rating (3)

@user_1847964968

Hello, I recently purchased this watch brand for my wife, but in a round 39mm case. There’s a significant problem with the strap; it doesn’t hold. Do you happen to have this model in a round shape? I’m not skilled in 3D design