DJI Osmo Action 4 insert - Free 3D Print Model

Search models, users, collections, and posts

OGWdesign

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

36 min

1 plate

5.0(5)

Open in Bambu Studio

Boost

227

484

499

Released

Description

This insert is for the DJI Osmo Action 4 camera. This insert goes into the Rugged Hard Case (see link below for download). This is one of many inserts for the Rugged Hard Case.

https://cults3d.com/:1767379

Comment & Rating (14)

@RCO_PDM

Fits perfectly, all good. Thank you very much

Show original

@user_152213555

Boosted

Hello, thank you for the nice products. Could you make a small edit for osmo action 3? The lens part is a little narrow for 3, it will be enough to widen that part by 2mm.

The designer has replied

@OGWdesign

I will give it a try. My first idea is to widen the left side of the lens cut out only as there is plenty of material to remove there. If I widen the right side, there is not much material left already so widening it will basically eliminate the wall on the right side. If you are fine with a missing wall on the right side, I can attempt it and send you the file to test.

@user_3881245767

Can you share the outer box

The designer has replied

Show original

@OGWdesign

The outer box can be found in the link in the description

Show original

@user_489267344

could action1 use this

The designer has replied

@OGWdesign

Not this insert but if you go to the link in the description you can download the full case and insert that will fit the Action 1 and it's batteries

@ykistler77

Is this compatible with the Osmo 5?

Show original

@RCO_PDM

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent fitting insert for the Osmo Action

Show original

@simon.works

Would love this model to have the inside adjusted for the grip mount that comes with this DJI Combo :(( I'll attempt to model it myself and do a remix