Trunks - Hueforge - DragonBall Z Super - 159x200

5 Colors! Please be advised! This profile will print as if there are 2 AMS.

(It is possible to print with a single AMS, just reslice the print, change the yellow to black - just for the purpose of slicing- then once it starts to print a different color, swap your black to a roll of yellow and let it finish!)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Fresh Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA PolyLite Azure Blue Transmission Distance: 3
PLA Kingroon Yellow Transmission Distance: 11

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Fresh Red
At layer #12 (1.04mm) swap to Jade White
At layer #16 (1.36mm) swap to Azure Blue
At layer #21 (1.76mm) swap to Yellow for the rest.