Chevrolet Silverado (07-24) Truck Bed Hook - Free 3D Print Model

Search models, users, collections, and posts

themapster

Hobby & DIY>Vehicles

IP Report

Print Profile(2)

All

P1S

H2C

P2S

X1 Carbon

P1P

H2D Pro

H2S

X1E

H2D

A1 mini

X2D

A2L

PETG, 0.2mm layer, 8 walls, 15% infill

Designer

10.8 h

3 plates

5.0(4)

ASA, 0.2mm layer, 8 walls, 15% infill

Designer

17.8 h

1 plate

4.7(3)

Open in Bambu Studio

Boost

145

411

159

Released

Bill of Materials

Bambu Filaments

Select all

Black (33102) / Filament with spool / 1 kg

PETG HF

Black (45101) / Filament with spool / 1kg

ASA

List other parts

3/8"x1"Bolt x 1: Stainless_Steel_is_best
3/8hexnut x 1: Stainless_Steel_is_best

Description

Update-

Added ASA profiles (with added brim ears for added adhesion) for additional options on printing!

Designed for a 2020 Silverado truck bed, but it fits at least as far back as 2007 (though slightly overhangs the indention in the bed side).

It's made for a 3/8-16" x 1" bolt (and corresponding 3/8" hex nut). I glued the hex nut into the bottom piece for added security (and so it didn't drop down in the side of the bed).

See photos for basic installation process. I printed in PETG but other options like ASA might be better for strength and long-term durability. Infill is fine at 15%, but I highly recommend a significant number of perimeters for strength (I did 8 for reference). I plan on painting them for added UV protection and to better match the bedliner. I didn't load test them to failure on this most up to date version, but pulling from multiple directions didn't result in failure with a fairly significant pull outward and upward by yours truly.

Requires support under the hook piece during printing but this is included at least in the print profiles I have uploaded. Would recommend printing in the orientation shown in the screenshot and in the .3mf files for maximum strength.

Boost Me (for free)

Love this model? Give me a boost to inspire new ideas and pay for filament for test prints!

Membership

Want to print my models commercially? Please subscribe starting at $5/month using this link!

Join

Comment & Rating (16)

@user_286294385

Boosted

I've been looking for a replacement plug for this truck for years! Your print was perfect! I bought Black Oxide bolts, but they didn't have any washers in black oxide, and I don't think the stress is really in that direction, so I did without. These are great! Boosted!

The designer has replied

@themapster

Glad it worked out for you! Looks great and thanks for the boost! What material did you end up printing in out of curiosity?

@user_286294385

Boosted

Replying to @themapster :

Bambu PETG. I have a bed cover, so I don't worry about sun exposure. Thanks again!

@user_263717508

Boosted

After I started printing I did not know if they would fit my truck due to not having a year range that you made these for. I know that they will fit the 07-13 silverado years.

The designer has replied

@themapster

You’re right I forgot to put that in the description. I had designed it for the 2019+ generation/years but that’s awesome that it works on 07-13 as well!

@GunzNHoses141

Print Profile

ASA, 0.2mm layer, 8 walls, 15% infill

Printed very well. Gotta be careful when installing to ensure that the back piece engages correctly but with a little care it fits well and is holding up so far.

@Trixterrrr

Boosted

Looks good, I been looking for something to print with my ASA

The designer has replied

@themapster

thanks for boost and glad it worked out for you. the ASA is definitely an improvement for out in the weather prints like this.

@Hearnski

Boosted

Print Profile

PETG, 0.2mm layer, 8 walls, 15% infill

wonderful idea.. I chopped the loop off in the slicer as my intentions are just to use them to plug those holes! but amazing

The profile uploader has replied

@themapster

haha that’s a great alternate use for sure. good thinking there!

@PWilly

Boosted

Print Profile

PETG, 0.2mm layer, 8 walls, 15% infill

Masterfully designed. I had one of the backplates break during install but I'm pretty sure it didn't rotate when i tightened the bolt. Thanks for putting in the work on this and for sharing your creation!

The profile uploader has replied

@themapster

thanks for the rating and the boost! yeah the backplates are a little tricky even with the way I designed them to catch as they rotate. glad you enjoyed it!

@mehoff

Print Profile

ASA, 0.2mm layer, 8 walls, 15% infill

printed @50% infill with ASA on H2C. broke one inside tab because the bolt doesn’t get harder to torque it just bends the plastic until it breaks and you can’t tell how secure it is until it snaps off.

@MVPMVP

Print Profile

PETG, 0.2mm layer, 8 walls, 15% infill

@HILBLLY

Print Profile

PETG, 0.2mm layer, 8 walls, 15% infill

@user_4016909498

Print Profile

ASA, 0.2mm layer, 8 walls, 15% infill

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

Related Models

Bambu Lab Bed Scraper

jovanmontanez

24.1 k

5.5 k

Bambu Bed Scraper

Bambu Lab

184.6 k

18.3 k

Bed Scraper XL

ThreeD-Michael

78.8 k

13.3 k

Mini Bed Scraper

Jonas Daehnert

20.1 k

1.2 k