DIY Rick and Morty flying car with LED lights!!
Print Profile(1)
Description
If you like the Rick and Morty flying car with lights you may want to check out my Death Stranding Bike with Sam and LED lights! https://cults3d.com/en/3d-model/art/death-stranding-sam-on-his-bike-with-led-lights
Or my Ecto-1 with Lights!!! https://cults3d.com/en/3d-model/art/ecto-1-with-lights-and-sound-with-detailed-instruction
Check out the pictures for the tutorial. If you can't find the dome i used you can use another half sphere. Just test your dome first with dome_test.stl! You can scale the model if necessary then.
The finished car is about 9cm in height and the diameter is about 17cm.
Enjoy! :)
Edit 21.08.2019
Upgraded the Lights with an arduino and WS2812 LEDs.
Post-Printing
Arduino Code
#define LED_PIN 8 #define NUM_LEDS 5 #define BRIGHTNESS 100 #define SATURATION 255 #define COLOR 25 #define DELAYTIME 10 #define FADESTEPS 30 CRGB leds[NUM_LEDS]; void setup() { delay( 3000 ); // power-up safety delay FastLED.addLeds(leds, NUM_LEDS).setCorrection( TypicalLEDStrip ); FastLED.setBrightness( BRIGHTNESS ); } void loop() { for(int i= 0; i < NUM_LEDS; i++){ for(int j = 0; j < FADESTEPS; j++){ leds[i].fadeLightBy( j* (255 / FADESTEPS )); if(j > FADESTEPS/2){ leds[(i+2)%NUM_LEDS] = CHSV( COLOR, SATURATION, 254); } FastLED.show(); delay(DELAYTIME); }} }
include ===================
Boost Me (for free)
If you enjoyed what I created, a Boost would mean a lot! Cheers!
Membership
If you'd like to sell my work physically or simply support what I do, consider becoming a member!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)