AMS/AMS 2 pro Universal Stand + Gridfinity/Plates - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

SThane

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

X1 Carbon

P2S

P1S

H2D Pro

X1E

H2C

H2S

P1P

H2D

X2D

A2L

AMS & AMS2 Multi-Tier Universal Stand with Wide 2020 Profile

Designer

40.6 h

12 plates

4.8(16)

AMS ONLY - 2020 Profiles with Wide option

Designer

74.5 h

20 plates

4.9(10)

AMS ONLY - Square Profiles

Designer

60.3 h

18 plates

4.8(6)

Open in Bambu Studio

Boost

337

1053

585

154

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Round Magnet

Description

Now fits both AMS & AMS 2 pro!

There have been at least 6 versions of the AMS Bottom Cover Unit, each with variations on the number and size of vertical wall cavities, and now the AMS 2 pro has different dimensions, and wall cavity configuration. Because of this, it's difficult for both modelers and makers to get the right fit.

While discussing remix option of my previous design with @bedebe, I decided to try to solve that issue. I've also provided options for an integrated build plate holder and side brace, with or without Gridfinity bases and/or braces. That worked for the original AMS, but not for the AMS2, so I've modified to fit both.

While discussing additional options with @AJarrett46, we came up with the middle brace for the third tier, the wide bracket and brace options for added stability (without requiring additional 2020 Aluminum Profiles), and I modified the braces and brackets to resemble 2020 profiles.

You can find my custom bins in my Gridfinity Collection. For standard bins, you can build your own using this tool, or download the master collection.

Updates:

03-MAY-25: New version fits both AMS & AMS 2 pro! Dimensions adjusted and removed 2020 profiles where unnecessary
- 06-MAY-25: Added the screw hole back to the top, middle and bottom brackets, and added shelves below the holes to keep the T-Nut from turning when inserting the profiles.
26-OCT-24: New print profile! All braces and brackets shaped like 2020 profiles - optional full-width top bracket and center brace
05-OCT-24: For Front-Facing profile (1) removed inner bevel from all channels and increased the depth to 25mm
02-OCT-24: There are now 3 print profiles to choose from based on the placement of the screws
- Front-Facing Screws: Places screws in the front and back of all braces and brackets
- Mostly Side-Facing: Places screws on the side of braces, and brackets that don't have obstructions (all except 03, 05, 07, 09)
- Brace-Only Screws: Places screws only on the side of the braces (02, 04, 06, 08, 10, 14), and the center bracket (18), and requires fewer screws
29-SEP-24: New 3-Tier option for 3 vertically stacked AMS!
28-APR-24: Added options for 80 & 160 filament swatches
19-APR-24: Added options for Gridfinity plates

New AMS & AMS 2 pro version:

A complete set includes:

Base Bracket and Side Brace - choose two, one for each side
1. 01 + (06 or 07): Lower Bracket + Side Brace or Gridfinity Brace
2. 02 + (06 or 07): Lower Gridfinity Bracket + Side Brace or Gridfinity Brace
3. 03: Lower 5-Plate Bracket + 5-Plate Brace - Optional: 05: Gridfinity Base Plate 1x5 Extension
4. 04 + 08: Lower 10-Plate Bracket + 10-Plate Brace - Optional: 05: Gridfinity Base Plate 1x5 Extension
Middle Tier - for 3 or more AMS/AMS2 - choose one
1. 09: N-Tier Middle Bracket - Recommended: Two side braces: 06 (x2) or 06 + 07
2. 10: Wide N-Tier Middle Bracket - Recommended: Two side braces: 06 (x2) or 06 + 07
Top Tier - choose one
1. 11: Top Bracket
2. 12: Wide Top Bracket

Printed and related non-printed parts by build plate:

01: Lower Bracket - Required: P4 (x2)
02: Lower Gridfinity 1x5 Bracket - Required: P4 (x2) + ND (x20 for 4 corners) or ND (x10 for 2 corners)
03: Lower 5-Plate Bracket & Side 5-Plate Brace - Required: P4 (x2) + M5 (x2) + MT (x2)
04: Lower 10-Plate (10) Bracket - Required: P4 (x2)
05: Lower Bracket Gridfinity 1x5 Extension - Required: ND (x20 for 4 corners) or ND (x10 for 2 corners)
06: Side Brace - Required: M5 (x2) + MT (x2)
07: Side Gridfinity 1x5 Brace - Required: M5 (x2) + MT (x2), unless sitting on 08
08: Side 10-Plate Brace - Required: M5 (x2) + MT (x2)
09: N-Tier Middle Bracket - Required: P3 or P4 (x4) + Optional: P3 (x2) + LJ (x4) for added horizontal stability
10: Wide N-Tier Middle Bracket (Print 2) - Required: M5 (x6) + P3 or P4 (x4)
11: Top Bracket - Optional: P3 (x2) + LJ (x4) for added horizontal stability
12: Wide Top Bracket (Print 2) - Required: M5 (x6)

Non-Printed Parts:

M5: M5x12mm Countersunk Hex Socket screw
MT: M5 T-Nut
LJ: 6mm L-Joint Brackets and screws
P3: 380mm 2020 aluminum profile
P4: 400mm 2020 aluminum profile (or 420mm for full lid clearance)
ND: 6x2mm neodymium magnets

Old AMS Versions:

A complete set includes:

For 2-Tiers:
- 2 x Upper Brackets
- 2 x Side Braces
- 2 x Lower Brackets
- Optional Gridfinity and/or Filament Swatches
For the 3rd tier add:
- 2 x Middle Brackets
- 2 x Side Braces

Combinations include (but are not limited to):

For 2-Tiers: (if using print profile 1, optionally replace 01 with 20 + 20 for full-width bracket - and add 6 screws without nuts)
1. 01 + 02 + 02 = Frame-only (8 screws + 8 nuts)
2. 01 + 02 + 03 + 04 = Small Plate holder on the left (12 screws + 12 nuts)
3. 01 + 02 + 05 + 06 = Small Plate holder on the right (12 screws + 12 nuts)
4. 01 + 03 + 04 + 05 + 06 = Small Plate holder on the left AND right (12 screws + 12 nuts)
5. 01 + 02 + 07 + 08 = Large Plate holder on the left (12 screws + 12 nuts)
6. 01 + 02 + 09 + 10 = Large Plate holder on the right (12 screws + 12 nuts)
7. 01 + 07 + 08 + 09 + 10 = Large Plate holder on the left AND right (12 screws + 12 nuts)
For 3-Tiers add 18 to any of the options above (if using print profile 1, optionally replace 18 with 19 + 19 for full-width brace)
(8 screws + 8 nuts - and add 6 screws for the wide brace)

Optional Gridfinity and Filament Swatch add-ons:

11 = 1x6 Gridfinity Brace on left, compatible with combination B, D, E and G
12 = 1x6 Gridfinity Brace on right, compatible with combination C, D, F and G
13 = Connectors and 1x6 Gridfinity Base on left and/or right, compatible with combination B, C, D, E, F and G
Optional magnet covers for a clean look, or to keep loose magnets from coming out
14 = 80 Filament Swatch Brace on the left, compatible with combination B and D
15 = 80 Filament Swatch Brace on the right, compatible with combination C and D
16 = 160 Filament Swatch Brace on the left, compatible with combination E and G
17 = 160 Filament Swatch Brace on the right, compatible with combination F and G
If using print profile 1: add 2 screws + 2 nuts to control height for 11-12 and 14-17

In addition to the printed parts, you will need the following:

For 2-Tiers:
- 4 x 400mm (or 420mm for full lid clearance) 2020 aluminum profile
- M5x12mm Countersunk Hex Socket screw & M5 T-Nut based on selected options (counts provided in red above)
- For added stability, use the following optional parts
  - 2 x 380mm 2020 aluminum profile
  - 4 x 6mm L-Joint Brackets and screws
  - These are not necessary if using optional wide bracket 20 from print profile 1
For 3-Tiers add:
- 4 x 380mm (or 400mm for full lid clearance) 2020 aluminum profile - the top tier uses 20mm shorter aluminum profiles.
- M5x12mm Countersunk Hex Socket screw & M5 T-Nut based on selected options (counts provided in red above)
- For added stability, add the following additional parts:
  - 2 x 380mm 2020 aluminum profile (in addition to the ones for 2-Tiers, for a total of 4)
  - 4 x 6mm L-Joint Brackets and screws (in addition to the ones for 2-Tiers, for a total of 8)
  - These are not necessary if using optional wide brace 19 from print profile 1

For Gridfinity base/brace plate options:

12 or 24 x 6x2mm neodymium magnets each for 11, 12, or 13 - 2 for opposite corners or 4 for each corner per grid

Documentation (3)

Assembly Guide (3)

AMS & AMS2 _ Two-Tier with Aluminum Horizontal Profiles.pdf

AMS & AMS2 _ Two-Tier with Printed Horizontal Profiles.pdf

AMS ONLY Universal 2-Tier Gridfinity-Swatch-Plate Stand.pdf

Comment & Rating (85)

@Zizzi93

Hello, does it also work with 2020 perforated square aluminum profiles?

The designer has replied

@SThane

Hi @Zizzi93 I'm not familiar with that, and haven't tried. I've only use v-slot style 2020 square aluminum extrusions. Do you have a link or photo? If it's just a square tube with holes spaced evenly on all sides, then it may work, but you might need to use different fasteners than the screws listed on the model.

@Zizzi93

Replying to @SThane :

It's a square tube 20x20 basically. I ask because they coste 3.65€ x meter locally. v-slot extruded profile cost a lot here, More if you had to cut it to measure: I can't send a link but this is a photo from Tecnomat site

@SThane

Replying to @Zizzi93 :

Sure, that should work. Since there isn't a channel, if you want to securely fasten the profiles to the base and top brackets, you might try using a shorter screw, like an M5x6, and maybe flathead instead of countersunk.

@ajarrett46

Boosted

great design if you need to save space and stack things higher

@flexy2dd

Print Profile

AMS & AMS2 Multi-Tier Universal Stand with Wide 2020 Profile

Perfect for making space on my desk, very practical and very useful

@beastie

Boosted

Print Profile

AMS ONLY - 2020 Profiles with Wide option

Nice design! I opted for bare frame with wide top bars (02+02 + 20+20). Everything is fine! Small neatpicking: The M5x12 screws are hitting the end of the holes, increasing the depth of the holes by 0.5mm would be good! The profile overhangs are a little bit too aggressive, there were some delaminated strings! Decreasing the overhang angle by choosing a bigger subtraction circle radius and moving the center outwards of the profile would be better! Thanks for the design as it is anyway! :)

@HobCraft

Boosted

excellent design. I already have some 2020 on order. any chance you are planning an eibos tetras update?

The designer has replied

@SThane

Interesting idea! It wasn't really on my radar, but looking at the design, it seems that the mods are primarily in the front and back of the AMS base. If the sides are unobstructed, you could probably use the brackets that I've indicated in the attached image.

@SThane

Replying to @SThane :

And if you need additional stability, you could attach the two sides with a piece of 2020 profile and a couple t-nut inner angles.

@HobCraft

Boosted

Replying to @SThane :

I’ve been printing but have run into a bit of a bottleneck. I was going to use the n-tier ams bracket to hold the lower ams with tetras but it’s not a through bracket. None of the brackets with ams arms are through brackets. I need through brackets because the tetras adds quite a bit of height under the ams, and I’d rather not have to cut short segments of 2020 to bridge the lower ams bracket and the foot bracket. Any chance you could whip up a through ams bracket (hollow with no 2020 terminator)?

@yahoo.com

Boosted

will this fit the new ams2

The designer has replied

@SThane

Hi @yahoo.com , this version does not, but I have a modified version that fits both AMS and AMS2. I'm in the process of printing it now, and hope to post it in the next couple days.

@yahoo.com

Boosted

Replying to @SThane :

Will the connecting bar still be 380mm?

@SThane

Replying to @yahoo.com :

The newest version of the design no longer needs the connecting bar. But, if you already have them, they should still work. There was only a slight adjustment, so there may be a small gap, but the L-Joint Brackets can compensate for that.

@Tekki91330

Print Profile

AMS & AMS2 Multi-Tier Universal Stand with Wide 2020 Profile

@yahoo.com

Boosted

I purchased my ams units at different times but they all fit this just fine. I printed the model with the build plate holder. Any chance you will be designing one for the new ams2 with the dryer

The designer has replied

@SThane

Yes, I'll order one, and start designing the update ASAP.

@SThane

OK, I've received my AMS2, and have made some adjustments to make the model compatible with both AMS and AMS2, so you can use it with either or both. I placed it in a 3-tier stand with the AMS2 on the bottom and two AMS stacked above it, but it could also be placed in the middle or top. I need to work on it a bit more, but hope to have it posted soon.