Mikrotik hAP ac² USB-C mod - Free 3D Print Model

Search models, users, collections, and posts

rondel

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

41 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

A simple model to hold a USB-C Power Delivery trigger board from AliExpress for the MikroTik hAP ac². To install you need to desolder the original connector, insert the USB-C board into the print and solder some wires back to the connector on the bottom side of the PCB.

A Fusion 360 source file is provided if you want to adjust the tolerances.

Comment & Rating (3)

@soulgonemobile

AliExpress link is dead, could you upload a picture of what the module looks like inside/outside your print?

The designer has replied

@rondel

here it is https://a.aliexpress.com/_EwaxAXm please be aware that this was my first ever 3D design and the tolerances are quite tight in general. you may need to make some adjustments in the provided f360 file, especially since the USB-C connector can be skewed on some modules and the PCB not cut perfectly.

(Edited)

@buronson98

Print Profile

0.16mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.