Ender 3v2 Drawer Extension For Extender 400 Kit

Summary

This extension is built for those who have extended their Ender 3v2 with an Extender 400 kit but also want to use this Octopi/LCD drawer by ma77morris. Currently, it serves no function other than to support the drawer so it that it fits snug between the y-axis and leg of the printer. It fits very tightly and you'll have to use a little bit of force to push the drawer and extender all the way to the cross-brace.

Currently 3 versions are listed. Version 1 does not have any vents and uses thick walls. Version 2 has vents, but still has thick walls. Version 3 has vents and thinner walls. I have not tested version 3 yet. I believe that the walls are still thick enough to support the drawer without issue and it saves about 8 grams of filament.

If using the STL files, Cura may scale incorrectly. Multiply the scale by 2540% for proper scaling. Correct measurements when standing vertically should be 44.95mm x 93.3mm x 147.4mm. The 3mf files don't seem affected by the same issue.

I've gone ahead and posted the .par files in case anyone would like to modify the design in Solid Edge.