laptop Ram stand - Free 3D Print Model

Search models, users, collections, and posts

HFX Creations

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.3 h

1 plate

4.4(31)

Open in Bambu Studio

Boost

258

605

401

Released

Description

A little rack / container / holder / stand for your excess laptop RAM cards.

1 Stand holds 16 cards. Designed to be sturdy enough to not fall apart when loaded and/or lifted.

Comment & Rating (38)

@doobo4ak

Print Profile

0.2mm layer, 2 walls, 15% infill

for DDR1-3 don’t for ddr4

@Andretti

Boosted

Print was perfect for DD3-memory. DD4-memory is a millimeter wider and will not fit in this design.

(Edited)

@Loanshark

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

love it. easy and compact. I support you .

@Maniacworkzs

Print Profile

0.2mm layer, 2 walls, 15% infill

Top and Bottom does not lock

@kenmos

Print Profile

0.2mm layer, 2 walls, 15% infill

This box is so nice for DDR3. I did a small remix to fit DDR4 ram for laptop.

@pinguinside

Print Profile

0.2mm layer, 2 walls, 15% infill

Other Issues:Model is to small, it's not fitting my dimms. You can see it in my Picture.

@Sarx

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

Other Issues:The measurements turned out badly for my DDR4 SODIMM RAM. It's about 1mm too snug to be of any use and could do with that extra 1mm width in the slots. It could be down to shrinkage, I used bambu basic pla filament. wasted print sadly

The profile uploader has replied

@hilal_h18

there are 25 people who printed it perfect and you are the only one who managed to get a bad one. couldn’t it be your printer?

(Edited)

@Sarx

heya, I used the basic pla on a p1p and when trying to put ddr4 into the slots it turns out as below. I've since printed out another model that has less strict tolerances. it very likely is something I've done as it's my 3rd print ever.