Modular Corner Jig with option of changing corner Radius Inserts.
How it works? Very simple! Just choose insert with needed Radius, put it together with Main Jig Body and secure the insert with a Lock screw. Main Body has a threaded hole for Lock Screw to keep it together when you are not using a Jig.
Jig corner insert Radius sizes in this set:
10mm
15mm
20mm
25mm
30mm
35mm
40mm
If You need different size, give me a shout and I'll make it for you.
Here are separate profiles for Main Body and inserts (+screw) Profiles. For inserts and Screw, supports are NOT needed. For main body , they are not necessary as well, but I would advise to use Supports, but paint them away from threaded Hole.
19.04.2024 Update
- Added Changeable insert Lock Screw without Cap so You can use a Jig with a router with bigger base. All You need is a Philips Screwdriver.
You can find it in STL files here.
That's it. Quite simple I guess.
You can Buy me a coffee if You feel good doing so :)
https://www.buymeacoffee.com/warlogh
(And very Big Thank You For interest in my work)