Search models, users, collections, and posts
Print Profile(3)
0.6mm nozzle, 0.3mm layer, 3 walls, 15% infill
Designer
12.4 h
1 plate
65% for regular ext. cord - 0.2mm layer, 3 walls, 15% infill
Designer
6.3 h
1 plate
65% - 0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill AMS
Designer
19.4 h
1 plate
Open in Bambu Studio
Boost
303
815
19
14
244
99
Released
Description
Designed to hold my 30 amp camper extension cord junction off the ground, also made a 65% reduced model for a normal extension cord. Has wings with holes to hold down with small tent stakes or screw into a surface.
When printing at 65% i do not recommend using AMS with a nozzle larger than 0.4 as it will leave gaps in roof. It prints best at 0.4 without AMS to be painted by hand later.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (19)