Print Profile(2)
Description
Bring some spring into the house with this Small fountain.
A beautiful decoration between flowers and plants or for humidification.
The parts are simply plugged together and the height can be individually determined by the number of bowls.
With 6 bowls, the fountain is approx. 300mm high.
The individual elements are only sealed via the conical fit of the bowls, which is why it is important to print with good quality. => 0.16 high quality
In addition, only a small water pump is required, such as this one: https://www.amazon.de/dp/B09Z2NS9YF?psc=1&ref=ppx_yo2ov_dt_b_product_details
The pipe for connecting the pump to the tower is included with the pump and can be inserted directly into the tower from below after it has been shortened a little.
If you are using a different pump, it is best to print a small adapter hose with TPU.
Start operation:
It is best to remove the shells from the second shell and then start the pump. Only when the pump has pumped out the air, attach the upper shells.
If you don’t like that some water runs along the tower, you can glue the parts together. But then you should not glue the first shell to the tower. (See start operation)
You are also welcome to take a look at my other fountains:
or:
Boost Me (for free)
If you like the design, I appreciate a 'boost me'
Membership
By signing up as a member, you receive permission to use physical prints of my models for commercial purposes.
© Staprin3D
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (57)