Hornady LNL AP Reloading Press Akro Bin Mount

This mount allows you to mount an Akro Mills Bin to the front bar of the Hornady LNL AP press. Stock Hornady bins are the 30210 models.

Bin Mount Sizes

Single

Double (about 75% support of each bin)

Double Longer (100% support of each bin)

Clamps

There are 2 different castings of the Hornady LNL AP press. Old style had more of a square shape support bar and the newer presses are a little wider.

Old Clamp fits older square bar presses.

New Clamp V7.3 should fit the newer presses.

New Clamp V8.3 is a little wider and may fit some newer presses better.

New Clamp V9.2 is my newest design and should clamp down better.

Misc

Akro Bin expander should work on most bins in the same size range as the stock bins.

Print Settings

Nozzle 0.4mm or 0.6mm

Walls 4 or more for 0.4mm nozzle and 3 for 0.6 nozzle.

Top layers 3 and 2 bottom layers.

Infill 20-25% Gyroid

Tested with ESUN PLA+ and GST3D PLA+.

No supports needed.

Hardware

Designed for using #8 5/8" screws. Hillman 31161500 at Lowes.