The base and hanger have to be printed separately due to height. The base is made for the official PS5 controller charger to fit on it. There are two hangers to chose from one that is a standard hook type hanger on top that will work for either headset. The second hanger is made so the hanging charger that comes with the pulse elite will attach to the hanger. You will have to lay the hanger down and rotate 45° for it to fit on the build plate. The base does not need any supports. The Pulse 3D hanger does not need any supports if layed on proper side. The Pulse Elite hanger should be place on its back with the mounting tab facing up, the mounting tab will need supports.