Nerf Extended Magazine - Free 3D Print Model

Search models, users, collections, and posts

Tojo

Toys & Games>Outdoor Toys

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

5.6 h

1 plate

4.5(22)

Open in Bambu Studio

Boost

121

287

348

145

Released

Description

Very stiff spring, to be pressed first so as not to ruin the darts

nerf

magazine extend

Comment & Rating (49)

@MakersJustMake

Print Profile

0.16mm layer, 2 walls, 15% infill

worked, no tolerance issues, works fine in a nerf Fortnite BSAR-L

@Phourggie

low key tuff gun setup

@MakersJustMake

Replying to @Phourggie :

:) I modded a lot of neighborhood blasters last year

(Edited)

@void92

Boosted

did you colour that?

@Erik00

Print Profile

0.16mm layer, 2 walls, 15% infill

Thanks a lot for sharing! Works great and was able to fit 10 darts in the magazine. No problem firing the darts, and I like that the magazine fits both ways compared with the original. Considering to print the spring in tpu or petg to see if that works better. Will print more magazines!

@Erik00

The PETG spring feels a bit softer than the PLA, so sticking with that. I could fit 11 or 12 darts with PETG, but I think 9 darts are the optimal without compressing the darts too much.

(Edited)

@user_915464826

Came out perfectly, had zero tolerance to any nerf guns, worked well for electric ones in particular.

@void92

Boosted

why can’t you print this on the a1😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭

@user_1258602568

you can

@user_1258602568

you can you just have to use the desktop version

@A1isthefirst

ur gun in the pic is looking so tuff

@void92

Boosted

wait,your name is literally A1isthefirst so your printer should be an a1 right? but you can’t print this model on a1

@A1isthefirst

Replying to @void92 :

wdym i can still print it i can js change some things up and i dont get why ur saying this

@Mr.Chris_Amaya

Boosted

@user_913204388 when I try to print the Nerf Mag when the model is slicing it says Slicing failed and I wanted to know how to fix that

(Edited)

The designer has replied

@user_913204388

hey thanks for the feedback I haven't encountered the problem since testing, can you try printing from the PC? you can try restarting the printer and modem

(Edited)

@Erik00

No problems printing here. Did you have support? when slicing?

@void92

Boosted

how many bullets can this hold?

@user_3522310541

I belive about 10

@iexistiguess

does this work with adventure force guns?

@user_1251458169

yes

@nerf_lover

Boosted

the spring is included?

The designer has replied

@user_913204388

yes, the spring is there but it is not as good as an iron one this one is stiff just made, it compresses the darts a lot

@user_1762253434

Print Profile

0.16mm layer, 2 walls, 15% infill

super 🤩

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.