Bambu Lab

cover

OPE00023.JPG

plate_1.png

小船_9c1e9fe2-5f07-4526-a994-a91d9c933566.webp

The print profiles are strictly follow the rules of speed race boat.As the printer profile & filament profile is modified a lot , so please use the "Open in Bambu Studio" button to import the .3mf into the Bambu Studio.&nbsp;Note: As the first layer speed is fast , the adhession is critical , so make sure that the build plate is carefully washed before print.&nbsp;&nbsp;#3DBenchy<a target="_blank" href="http://3dbenchy.com/" rel="nofollow noopener">3DBenchy.com</a>

14min44s, Bambu PLA Basic, A1

OPE00021.webp

This .3mf for 3DBenchy uses the same setting as the sliced file “SpeedBoatRace_Bambu Pla Basic” in the A1 mini SD card . The print time is around 12min42s .As the printer profile & filament profile is modified a lot , so please use the "Open in Bambu Studio" button to import the .3mf into the Bambu Studio.Note : <ol><li>The bottom layers in “SpeedBoatRace_Bambu Pla Basic.gcode.3mf” in some early produced A1 mini was wrongly set to 2 , which should be 3, this .3mf fix this .</li><li>As the first layer speed is fast , the adhession is critical , so make sure that the build plate is carefully washed before print .</li></ol>&nbsp;#3DBenchy3DBenchy.com

12min42s, Bambu PLA Basic, A1 mini

MtsrPrinting

benchy.png

Benchy for P2S (0,4mm nozzle)

axelstechniccorner

WhatsApp Image 2024-02-05 at 09.30.42_c1dfd326-6c11-47e6-b254-47fc88a009f0.webp

A High Speed Printprofile , if you want to push it more check my Profile axelstechniccorner, there is a CHT file.For the real fasttime, please open it for a PC not a phone. If you change something like printer type or something elese, you might make the print time longer.&nbsp;As the printer profile &amp; filament profile is modified a lot , so please use the &#34;Open in Bambu Studio&#34; button to import the .3mf into the Bambu Studio.

14m33s print time P1P / P1S and P2S original SD card file

vwiefranz

WhatsApp Image 2025-05-16 at 12.33.40.jpeg

WhatsApp Image 2025-05-23 at 19.34.00(1).jpeg

Recreated the Original Settings which are on the SD Card of my Bambu Printer.

Bambu P1/X1 Original Settings from SD Card with 2 Walls

WhatsApp Image 2025-06-11 at 19.48.39.jpeg

Recreated the Original Settings which are on the SD Card of every Bambu Printer. And Changed the speeds for Bambu PETG.

PETG Bambu P1/X1 Original Settings from SD Card 2 Walls

Master_Norris

20251103_112519.jpg

20251103_112511.jpg

0.20mm layer10% adaptive cubic infill2 Walls2 Ceilings2 Bottom layers

PETG Benchy: 0.20mm layer, 10% adaptive cubic infill

noraxes

Screenshot 2025-12-09 at 5.39.40 PM-Photoroom.png

SUPER FAST BENCHY IN ONLY 7:45! Glue may help with adhesion because of the fast speeds. PRINT IN LUDICROUS IF YOU WANT 7:45! PRINT IN SPORT IF YOU WANT 8:41! PRINT IN REGULAR IF YOU WANT 10:59!Print times may vary by a bit and these times are for me right now. GOOD LUCK!

7 MIN 15 SEC Benchy

Kn0pf

signal-2025-04-26-171342_002.jpeg

0.08 layer height0.2 nozzle

Profile for 0.2 Nozzle and 0.08 Layer height

The Techy

tempImagembme5n.jpg

IMG_5641.jpeg

IMG_5638.jpeg

IMG_5633.jpeg

IMG_5636.jpeg

<ul><li>16 minute printing time, tested on A1 Mini</li><li>2 walls, 0.28mm layer height, 10% infill (Note: does not follow speedboat rules)</li><li>Optimised to print faster (increased speed and acceleration, fastest infill, angled model etc)</li><li>SPEED</li></ul>This was pretty much the fastest I could get it to print on my A1M without significant quality loss (although it could be printed faster on an P/X/H machine, or using speed/ludicrous mode). This will not be the highest quality benchy you have ever seen, but it will be a fast one. A fun little test for your printer. Provided you have a clean build plate, you shouldn&#39;t need glue or similar.

16min Benchy (any Bambu printer)

WhatsApp Image 2025-05-03 at 08.52.04.jpeg

any 3 colours you want to use with AMS.

3 colours 0.2mm layer, 2 walls, 15% infill

Volfera

05daf98b-39e2-4f02-a157-6dcd9feea37f.png

Sans titre.png

Print profile for 0.6 nozzle with the standard untouched designer settings

[0.6mm nozzle] 

Lucas_Yao

IMG_4376.png

IMG_4375.png

10 g filament only

Fin3dPrinting

IMG_9132_d37f75d3-bd47-4db2-9f72-44745ccacf0f.webp

plate_1.webp

IMG_9134_5a57caad-117b-4d91-83f0-08625a594e97.webp

IMG_9135_2aa632e5-56d1-4850-9f01-2413b5e4fbbe.webp

IMG_9133_77842ec9-1f34-48b9-b0f8-d14acbf9c5e0.webp

This is a 7 minute benchy minute benchy printing in &nbsp;minutes and 45 seconds! there is no brim for speed but i would recommend putting a lot of glue so that it does not come off the build plate. PRINT IN LUDICROUS IF YOU WANT A SUB 8 MINUTE BENCHY!&nbsp;YOU CAN STILL PRINT IN NORMAL MODE AND IT WILL BE SUB 10 MINUTES, 9 MINUTES 45 SECONDSGOOD LUCK!Check out my shop at <a target="_blank" rel="noopener noreferrer" href="https://fin3dprinting.etsy.com/">https://fin3dprinting.etsy.com</a>see my YouTube channel at <a target="_blank" rel="noopener noreferrer" href="https://www.youtube.com/channel/UCr6vlDZr5RTa7Ya1-jMhi8w">https://www.youtube.com/channel/UCr6vlDZr5RTa7Ya1-jMhi8w</a>

7 MIN 45 SEC! LUDICROUS PLA normal speed SUB 10 minute!

WhatsApp Image 2025-06-20 at 09.25.58.jpeg

WhatsApp Image 2025-06-20 at 09.25.58 (1).jpeg

WhatsApp Image 2025-06-20 at 09.25.58 (2).jpeg

<ul><li>0.08 mm layers</li><li>15% infill</li><li>2 walls</li></ul>

0.08mm layer benchy

TechPrintLab

img_20251217_194105.webp

0.2mm layer, 2 walls, 15% infill

Pumpkin Studios

Print profiles_(1).png

20250726_121206.jpg

20250726_121219.jpg

Fine-tuned draft - 0.24mm layer, 2 walls, 9% infill

🎇3𝓓 𝓟𝓻𝓲𝓷𝓽 𝓦𝓲𝔃𝓪𝓻𝓭🎇

IMG_1122.jpg

IMG_1129.jpeg

IMG_1124.jpg

IMG_1125.jpg

IMG_1126.jpg

IMG_1127.jpg

I scaled this benchy to 350% as a display piece. It took me about 5 hours to print at 0.22 layer line. Enjoy!

Big Benchy! 350% scale

RenderReality

6107428295482740579.jpg

6107428295482740576.jpg

6107428295482740577.jpg

6107428295482740578.jpg

6107428295482740581.jpg

Mini Version 50%

Huaxidesu

IMG_20260321_205518.jpg

IMG_20260321_205812.jpg

得益于拓竹切片软件的平滑z轴外墙速度功能，可以让PLA PETG材料甚至ABS材料都能很好的在一套参数内打印，打印前请确保您在手机/电脑选择对应的耗材参数。平滑底面的作用是可以在底面写字，当作色卡（图2中小船底部耗材厂商名字已打码）。希望各位喜欢这个小船配置。-----20260417更新优化了船身冷却纹

Thanks to the smooth Z-axis outer wall speed feature of Bambu Lab Slicer, PLA, PETG, and even ABS materials can be printed well with a single set of parameters. Before printing, please ensure you select the corresponding filament parameters on your phone/computerThe smooth bottom surface allows for writing on it, serving as a color swatch card (the filament manufacturer's name at the bottom of the boat model in Figure 2 has been blurred out)I hope everyone likes this boat model print profile-----2026-04-17 UpdateOptimized hull cooling texture

PLA PETG ABS Universal Flat-Bottom Boat - Optimized for Shrinkage Marks

Minas

IMG_9732.jpeg

ABS 0.2mm layer, 2 walls, 10% infill

ABS 0.20mm layer, 2 walls, 10% infill

Guy with a 3d printer

image.jpg

2024-07-02_8eff57a3656cf

2 Color, 10% Gyroid, .20 layer Height 

Benchy for P2S (0,2mm nozzle)

Print Happens

tiny benchy.JPG

smallest benchy. only 1g - 0.08mm layer, 2 walls, 15% infill

Kitch 3Ds

red-benchy-boat-1.jpg.webp

benchy-blue-orange-white-1500-1262x631.jpg

Cattura 2.PNG

Cattura.PNG

Avevo bisogno di testare più filamenti differenti senza perdere il tempo del livellamento e per la preparazione della stampa ad ogni prova, così ho creato questo profilo di stampa in cui ci sono tre Benchy Boat, la sequenza per oggetto consente di testare più filamenti diversi in contemporanea senza cambiare il piatto di stampa. Spero che possa esservi utile! &nbsp;

I needed to test several different filaments without wasting time on leveling and print preparation for each test, so I created this print profile which contains three Benchy Boats, the print by object sequence allows testing multiple different filaments simultaneously without changing the print bedI hope you find it useful!&nbsp;

THREE BENCHY [OBJECT SEQUENCE]

Craft Lab

20251126_204919.jpg

0.25mm layer, 2 walls, 8% infill

GöransÄgare

Benchy.JPG

0.25mm layer, 2 walls, 2% infill

Gmino

20260312_202007.jpg

0.2mm layer, 3 walls, 15% infill

R47AN_S

IMG_5333.jpeg

Creator Optimised

Print Factor

image0 (1).png

This benchy takes 17 minutes to print with amazing quality. Fastest Benchy with good quality.

<17 minute Benchy (Good Quality) WORLDS FASTEST

Oleslaw12

IMG_20250507_171412[1].jpg

It is the best configuration for my printer.3,82m or 11,58g.

0.25mm layer, 2 walls, 10% infill 17mins

Migo50111

IMG_6269.JPG

IMG_6266.JPG

This is my modified Benchy and it prints really fast, in about 9 minutes with decent quality.&nbsp;To make it work&nbsp;<ul><li>Add glue to the build plate</li><li>Use a computer to slice and print or else it wont work</li><li>crank up the speed to 166% (for best result and time)</li><li>Turn off bed leveling (to save time)</li></ul>This model is modified to really test your printer. It is designed to print fast and weigh less.&nbsp;Make sure that your printer is calibrated before print&nbsp;Video of it printing<figure class="media"><oembed url="https://youtu.be/Niim38aIJ3g"></oembed></figure>

9 minute Benchy  0.28mm layer, 1 walls, 3% infill

slaying

images.jpg

Slowest benchy possible reaching 4 hours and 7 mins for the P2S. 100 pecent infill. for if you want to waste time.

Slowest benchy 0.08mm layer, 4 walls, 100% infill

Just keep Printing

Screenshot 2026-06-23 133323.png

6 MINUTE BENCHY PRINTED ON LUDICROUS

IMG_1666.JPG

ELEGOO PLA MATTE A1 MINI

#3DBenchy - The jolly 3D printing torture-test by CreativeTools.se

This .3mf for 3DBenchy uses the same setting as the sliced file “SpeedBoatRace_Bambu Pla Basic” in the A1 mini SD card . The print time is around 12min42s .As the printer profile &amp; filament profile is modified a lot , so please use the &#34;Open in Bambu Studio&#34; button to import the .3mf into the Bambu Studio.Note : <ol><li>The bottom layers in “SpeedBoatRace_Bambu Pla Basic.gcode.3mf” in some early produced A1 mini was wrongly set to 2 , which should be 3, this .3mf fix this .</li><li>As the first layer speed is fast , the adhession is critical , so make sure that the build plate is carefully washed before print .</li></ol>&nbsp;#3DBenchy3DBenchy.com<a target="_blank" href="https://www.3dbenchy.com/" rel="nofollow noopener ugc">https://www.3dbenchy.com/</a>

Benchy Bambu Pla Basic

ASIA

Print Profile(35)

Description

Comment & Rating (11010)

The user shared this model, but is not the original creator of it.

License

Related Models