VW spining wheel caps - Free 3D Print Model

Search models, users, collections, and posts

just_nikolay

Hobby & DIY>Vehicles

IP Report

Print Profile(1)

All

0.2mm layer, 4 walls, 99% infill

Designer

1.4 h

1 plate

3.0(2)

Open in Bambu Studio

Boost

Released

Description

Wheel caps for 57mm central hole. You need to buy bearings with an inner diameter of 7mm and an outer diameter of 19mm. There is a need to add weights, I recommend making them from lead or sand by pouring over it with super glue

car

wheel

Comment & Rating (6)

@panukettu

I realize today I could make spinner caps instead of regular caps for my car and was looking if such thing exists. I was surprised this seems the sole one. Why is there need to add weight? Is it for the bearing or just in general to match regular cap weight? Anyways, I will be modifying for my car so thanks for the great work.

The designer has replied

@nikolay_nikolov

it needs weight so it can stay in the right position when spinning

@GTIGuy89

Print Profile

0.2mm layer, 4 walls, 99% infill

bearings dont fit.... :(

The profile uploader has replied

@nikolay_nikolov

As you can see on the picture it fits. maybe your printer isn't calibrated and it have big deviations from actual dimensions. Run a test cube and see if the dimensions are the same as in the slicer