Search models, users, collections, and posts

Slinky Dog, toilet paper or kitchen towels

IP Report
GIF

Print Profile(2)

All
P1S
P2S
X1 Carbon
X1
H2D
A1
X1E
H2D Pro
H2C
H2S
P1P
X2D
A2L
A1 mini

0.28mm layer, 2 walls, 15% infill
0.28mm layer, 2 walls, 15% infill
Designer
31.3 h
5 plates
5.0(3)

Slinky Dog for A1-Mini.3mf
Slinky Dog for A1-Mini.3mf
9.9 h
4 plates
4.7(3)

Open in Bambu Studio
Boost
1233
2619
36
27
1.4 k
251
Released 

Description

Slinky Dog de Toy Story, para sostener papel de baño o papel de cocina.

Requiere Soportes

Para la parte de la cola de resorte, los soportes se haran por dentro del mismo, con paciencia y la misma pinza de cortar plastico pueden retirarlo facilmente, yo lo hice utilizando el AMS pero pueden hacerlo de un color y luego pintar a gusto.

 

*************************

 

Slinky Dog from Toy Story, to hold toilet paper or kitchen towels.

Requires Supports

For the part of the spring tail, the supports will be made inside the same, with patience and the same plastic cutting pliers can easily remove it, I did it using the AMS but you can do it in a color and then paint to taste.

Comment & Rating (36)

(0/1000)

Print Profile
Slinky Dog for A1-Mini.3mf
Very nice, the only drawback is the support placement, which leaves many marks and requires post-processing
Show original
profile
1
Reply
Boosted
The print profile is no longer public
Excellent print without any problems, regarding the supports, just use flush cutters and that's more than enough to remove them... but everything is great
Show original
0
Reply
Boosted
Incredible, no problem at all My apologies for the poor painting, but my niece loved it
Show original
0
Reply
The print profile is no longer public
Tail is delicate. Be careful removing support around the tail. It is so cute. mine had some rough areas on the top. might be the filament I used or something I did wrong. Love it.
0
Reply
The print profile is no longer public
great piece
0
Reply
The print profile is no longer public
Funny print that’s also have a purpose
0
Reply
The print profile is no longer public
The profile uploader has replied
0
Reply
I love it!!!
0
Reply
Hi, Love this! I mean if you didn't get a printer for things like this then why do you have a printer :). However is it possible to separate the model into the different colours? I don't have an AMS or airbrush and its going to loose its affect if its only in 1 colour. So if at all possible, I'd really appreciate if you can do that. Thank you so much
2
Reply
Please separate the parts to be printed and color them. This is very tedious work for each individual part. It would be nice if you could then upload the separated file. Thank you
Show original
1
Reply
Great design, but one major drawback is that you have to assign or paint the colors yourself in Bambu Studio. This is extremely tedious and results in a lot of filament changes. Up to 26 changes per print for just two feet. This could also be solved differently by providing the colored parts individually. Maybe the creator can separate them and upload a new file. That would be great
Show original
1
Reply