mireplica3d

cover

2024-03-27_6z6jhw6udbpw.png

2024-03-27_fqskeahin9hd.png

2024-03-27_c6s6d2qgbcei.png

2024-03-27_b20zwa7zr0ss.png

2024-03-27_v73pb2zxlhap.png

2024-03-27_fzgom3zuuvhf.png

2024-03-27_boo7o88kwwka.png

2024-03-27_0zn2cxh5g09l.png

2024-03-27_99ch54nbr918.png

2024-03-27_73ibg1qwbpal.png

2024-03-27_wzeeegxxrn8n.png

2024-03-27_qtbgzn6fp73h.png

2024-03-27_tzhc492u0trv.png

plate_1.png

plate_1.webp

屏幕截图 2024-03-29 222821_7366531e-9d9a-4287-88f1-197fc9a097cb.webp

Optimize parameters Quick printing<ul><li>0.2mm layer, 2 walls, 15% infill</li></ul>

Optimize parameters Quick printing

NSprints

09zGrj_iRwOWTSubdA7VkQ_7135ac1a-6527-4f79-99c3-1b4725eee6c3.webp

I changed the infill &amp; lined the settings up with one of my profiles that should provide the same quality but about 15%.Changing the layer width to 0.18 will add about15 minutes but I didn't see a huge difference in detail.Keeps the size of the designers small original.

same size, gyroid infill, minor tweaks

modybird

20240405_124021_8600c724-698d-4dc3-91f4-5d1beeaa8c19_e310fa07-f9c4-467e-9a58-8d614decd32d.webp

MAKE SURE YOUR BUILD PLATE IS CLEAN BEFORE THIS OR ELSE THE TEETH MIGHT NOT STICK TO THE PLATE.&nbsp;Printed part by part instead of layer by layer.&nbsp;&nbsp;Settings for the worm are standard 0.16mm, 2 walls, 15% infill. The teeth have separate settings for way lower speeds, a brim, and 100% infill&nbsp;No collisions&nbsp;

Worm and Teeth Single Build Plate Optimized

<div><h1>Summary</h1><div>Movement in all axis. Mini, standar and extralarge version. I'll reward the one who prints the longest one. 0.15 to 0.2 mm Layer 5 to 15 % Infill Support FreeFor extralarge version glue the parts is recommendedOptional Teeth 0.1 layer Under 55 mm/s</div></div>

Dune Flexi Sandworm. Print in Place. Support Free.

ASIA

Print Profile(3)

Description

Summary

Comment & Rating (281)

License

Related Models