SUSPENDED GHOST TV

Suspended designs have become quite popular recently, and I've printed a few myself, they are truly fascinating!

This idea came to me while I was designing a model for Halloween, a classic Japanese ghost movie where ghosts emerge from the TV!
Those remarkable lines can replicate the static interference experienced when a TV signal is weak. Placing it in front of the screen would create a truly eerie ambiance.

The model in the featured photo utilizes a total of six colors, but rest assured, you can employ up to four colors simultaneously, requiring only one AMS.
I used black/grey/white/light brown/dark brown/silver.

I divided the model into components to facilitate printing a beautiful surface at the optimal angle.
I have received numerous messages on my other models reporting difficulties with assembly, despite my clear instructions regarding Flow Rate Calibration and tolerance awareness.

To address this issue, I separated the tenons from the model's main body. This way, if assembly fails, the entire model does not need to be reprinted.

Within the file, I have utilized a dowel with a 0.1 tolerance as the default.
Additionally, a specially prepared dowel file encompasses four tolerances: 0/0.1/0.2/0.4
If the default file fails to assemble correctly, you can print this file based on your requirements, or test one of the options before printing them all.

Please refer to the image below for the assembly method. Remember to avoid excessive force to prevent accidental breakage.

Please accept my apologies for any inaccuracies in the Google translation.
Happy Halloween!

----------中文解說----------