SCX10.3 Frontend Grill Assembly for JLUR

Complete replacement for the SCX10.3 JLUR Front grill.

Features:

1. Built-in mounting posts with locking pin holes
   1. allows for the pins to go in from 4 different directions instead of 2
2. Accepts halo lights from kits like this (eBay Affiliate link)
   1. Note that its not possible to use the original headlights with this mod.
   2. In order to use the halo lights, you will also need to cut out the headlight plastic on your body
3. It also accepts LEDs for raptor like running lights in the grill. I suggest to use this lighting kit (eBay Affiliate link), which will allow you to replace all your original lights, give you 4x amber LEDs for the running lights and it all runs through 1 plug.
4. The grill gives a better Rubicon looking trim up front.

Roadmap:

1. The fitment of the 7 slot grill is not perfect, its very close but its not quite there 100% when you look close up. So I will be dialing that in, in future updates.
2. Sockets for the raptor light LEDs can be slightly improved.
3. The mounting posts need to be made modular to allow for different offsets to function as a body lift and not to have to reprint the entire grill if one or more posts break.

Updates:

• 3/25/2024 - Original upload of the V1
  • My part was made with PLA-CF and I have been running this mod for 25+ hours and nothing has broke, yet. My rig is about 10LB and its not uncommon for it to roll when I wheel.