Hellraiser box of lament movie prop.
The box measures 55mm on each side (about 2.16 ") the same size as a standard rubics cube. There's also now an upscaled by 150% version, this needs to print on 2 plates. Many thanks to Nick C for the suggestion and for doing the test print.
There are 2 print profiles of this model, one without a pause, one with a pause to add 1X 8mm diameter by 10mm deep magnet. There is space for 2 magnets but please only add one as the weight of the second magnet can make it a tad heavy to stick properly.
The model is made so it clicks together this can mean when it's a fresh print it can feel a little stiff at first.
I do recomend using a little ca glue when assembing the four side faces, the panels do clip on but the glue will hold it together much better. It's a good ides the lay the faces out one at a time and checking the orientation before gluing.