Jonny

Mars Rover Assembly Guide_d1f18af5-0cf6-4396-ab7c-76f0d376ae85.pdf

cover

Mars Rover_5fd6cdf0-4921-4f70-b74d-88c15582f519.png

plate_1.png

plate_2.png

plate_3.png

plate_4.png

Mars Rover_e5c541bf-6ca0-47b4-9782-6106d3a89c99.webp

Mars Rover_eaf2cfb6-9f1c-4ece-a361-a2165a4cac0e.webp

All 4 plates. Super easy to print. No supports required.

0.16mm layer, 2 walls, 15% infill

plate_5.png

plate_6.png

TreBar

IMG_20241211_211839.jpg

IMG_20241211_211804.jpg

Small profile for the A1 mini, in which the geometry is distributed over 6 plates.&nbsp;When printing with different filaments, the connectors did not fit well and the rover hung somehow crooked and bent. I then printed the connectors 10% larger in the X and Z axes. After that, everything sat cleanly. However, I didn't work this geometry change into the profile because it might fit better with standardised filaments.

Rover on 6 plates for A1 mini 

Another converted 3D Model for printing! This is a 3d replica of The Curiosity Rover - Mars Rover You will need to print 6 Tires, 6 Wheels, and 17 6mm Pin's. Parts list and assembly guide below. 3D Models were provided by Nasa. Personal Use ONLY, NO COMMERCIAL USE.

Large Mars Rover - The Curiosity Rover Complex

ASIA

Print Profile(2)

Description

Documentation (1)

Comment & Rating (24)

License

Related Models