TPU Bushing for Floating Logo Signs - Free 3D Print Model

Search models, users, collections, and posts

HangarDesigns

Art>Signs & Logos

IP Report

Print Profile(1)

All

X1 Carbon

X1E

P1P

H2S

A1 mini

H2D Pro

H2D

P2S

P1S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

15 min

1 plate

4.9(31)

Open in Bambu Studio

Boost

392

399

Released

Description

This bushing is used to secure an acrylic rod (https://www.amazon.com/dp/B09SKYYS5X?ref=ppx_yo2ov_dt_b_product_details&th=1) into a 14mm hole with a 2 degree draft angle. The bushing is inserted with the draft angle out, therefore locking the bushing into the part. This is printed in TPU and was designed to provide a secure connection to the acrylic rod that has slight manufacturing diameter deviations.

If you like this design, think about buying me a coffee (let's be honest- it's going towards filament)- https://www.buymeacoffee.com/thehangardesigns

Comment & Rating (35)

@3DimRu

Great sign/plaque --- I created the Rods for the floating back vs. buying -- you can glue them or leave as tight fit. check them out and let me know what you thinks... https://makerworld.com/en/models/92384

(Edited)

@BradyAaron

can you share this files

@3DimRu

Replying to @BradyAaron :

you should be able to download files posted.

@Navibp3d

A design and printing of 10! After several tests I leave the parameters in case any partner can be useful for the hooks. I gave a touch of glue to leave the hooks well firm🥰.

@myoung10765

Print Profile

0.2mm layer, 2 walls, 15% infill

@hookuum

Print Profile

0.2mm layer, 2 walls, 15% infill

Another great design thank you. I just bypassed the clear rod and printed them 400% longer on the z and 97% on the x and y

@Billybehr2

Print Profile

0.2mm layer, 2 walls, 15% infill

Very easy print. Very plug and play.

@yuklungsum

Print Profile

0.2mm layer, 2 walls, 15% infill

I like the idea and I remixed to have different height. I’ll upload in next couple days

@user_204904133

Print Profile

0.2mm layer, 2 walls, 15% infill

nice work and clean print

@gnjazy

Print Profile

0.2mm layer, 2 walls, 15% infill

Very helpful

@LeesX1

Print Profile

0.2mm layer, 2 walls, 15% infill

prints well. I used PLA. fits base and M snugly. need to lightly ground then dowel to fit… all good

@Chief_vorisj

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.