MNeilson

cover

20240325_071536_51f7ec8e-fb5e-4885-b0e6-cc2a2f35b218.jpg

L Bracket Set_46d24878-5405-475f-b5f2-8e5ada5c4991.png

1 inch Bracket

plate_1.png

1.5 inch Bracket

plate_2.png

2 inch Bracket

plate_3.png

2.5 inch Bracket

plate_4.png

3 inch Bracket

plate_5.png

3.5 inch Bracket

plate_6.png

4 inch Bracket

plate_7.png

4.5 inch Bracket

plate_8.png

5 inch Bracket

plate_9.png

5.5 inch Bracket

plate_10.png

6 inch Bracket

plate_11.png

plate_12.png

plate_13.png

L Bracket Set_46d24878-5405-475f-b5f2-8e5ada5c4991.webp

plate_1.png;filename*=utf-8''plate_1.webp

plate_2.png;filename*=utf-8''plate_2.webp

plate_3.png;filename*=utf-8''plate_3.webp

plate_4.png;filename*=utf-8''plate_4.webp

plate_5.png;filename*=utf-8''plate_5.webp

plate_6.png;filename*=utf-8''plate_6.webp

plate_7.png;filename*=utf-8''plate_7.webp

plate_8.png;filename*=utf-8''plate_8.webp

plate_9.png;filename*=utf-8''plate_9.webp

plate_10.png;filename*=utf-8''plate_10.webp

plate_11.png;filename*=utf-8''plate_11.webp

plate_12.png;filename*=utf-8''plate_12.webp

plate_13.png;filename*=utf-8''plate_13.webp

20240325_071536_e61080d4-4458-4920-89cc-93c93d1f7be8.webp

No brim0.16 mm layer20% gyroid infill3 walls

0.16mm layer, 3 walls, 20% infill

user_952730168

20250612_214853[1].jpg

reduced printing speed for better surface quality.printed with geeetech abs black.

0.12mm layer, 5 walls, 15% infill A1 Mini PETG

20250612_214732[1].jpg

Printed with the X1C with ABS. I preheated the chamber to approx. 56 degrees. To do this: Raise the print bed completelyMove the print head to the rear. Set the bed temperature to 110 degrees. Set the side fan to 100 percentI think it should be called aux fan in the app. Then wait about 30 minutes, then the build chamber will hold 50 degrees in a 20 degree room. Printed with Geeetech ABS+ at 110 degrees bed temperature. Flow reduced to 25 in the filament setting. the high number of outer walls due to the lower layer thickness

0.12mm layer, 6 walls, 15% infill X1C ABS

dethleffson

preview3d.png

This print profile provides the missing Center Brackets (center-fixed.stl) for this amazing Heavy Duty Shelf Bracket system. It includes 4 different sizes on separate plates, fully sliced and optimized for load-bearing applications (especially using PETG or Tough PLA).&nbsp;📐 Included Center Bracket Sizes:<ol><li>Plate 1 - Size XL (212 mm): 37.15 x 212.4 x 212.4 mm (For extra deep and heavy-duty shelving)</li><li>Plate 2 - Size L (140 mm): 24.45 x 139.7 x 139.7 mm (Great allrounder for standard workshop racks)</li><li>Plate 3 - Size M (127 mm): 22.22 x 127.0 x 127.0 mm (Ideal for mid-sized shelves)</li><li>Plate 4 - Size S (114 mm): 20.00 x 114.3 x 114.3 mm (Perfect for smaller, compact setups)</li></ol>&nbsp;🛠️ Optimized Heavy-Duty Print Settings:To ensure maximum structural integrity so your shelves don&#39;t sag under heavy load, these plates have been pre-configured with the following expert settings:<ul style="list-style-type: disc"><li>Layer Height: 0.24mm Draft (Thicker layers significantly improve layer adhesion and overall part strength).</li><li>Wall Loops: 5 (Crucial for strength! Functional parts carry most of the stress on the outer shell).</li><li>Infill Density: 20%</li><li>Infill Pattern: Grid / Cubic (Selected for efficient printing times on larger models while maintaining solid compression strength).</li><li>Infill Combination: Enabled (Reduces total printing time by half without compromising stability).</li></ul>Print time has been optimized down to roughly 10 hours for the entire high-strength set. Ready to print!

Center Brackets (4 New Sizes)

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This is a set of 11 L-Brackets. Each is on their own plate so you can print whichever size you want.The sizes are:1&#34;, 1.5&#34;, 2&#34;, 2.5&#34;, 3&#34;, 3.5&#34;, 4&#34;, 4.5&#34;, 5&#34;, 5.5&#34;, and 6&#34;. The 1&#34; bracket has 1 hole per leg, the 1.5&#34; thru 2.5&#34; brackets have 2 holes per leg, and 3&#34;+ has 3 holes per leg. They are designed to work with #6 or #8 wood screws with countersink, which is a super common screw you can get at any hardware store. I have included the STLs in case you want to print at a different orientation or different settings, etc. Great for DIY projects such as desktop shelves, etc. 3D printed brackets should always be considered “light duty”. They should not be relied on when safety, heavy loads, or storing valuables are a concern.  I have heavier duty brackets located here!! <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/1507468-heavy-duty-shelf-bracket-with-bambu-lab-logo">https://makerworld.com/en/models/1507468-heavy-duty-shelf-bracket-with-bambu-lab-logo</a> <boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please consider boosting me so I can continue providing great models!</boostcontent></boostme>

Print Profile(4)

Description

Comment & Rating (502)

License

Remixes (1)
(Created before license restrict)

Related Models