Light House Bird Feeder - Free 3D Print Model

Search models, users, collections, and posts

Jamboodle

Household>Garden

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

14.4 h

5 plates

4.9(53)

Open in Bambu Studio

Boost

548

1192

578

291

Released

Description

Light House Bird Feeder - Three color bird feeder in the resemblance of a classic light house. Pictured size is 300 mm (12 inch) tall

Please give it a like and check out my other work: Jamboodle

Thanks for looking and Happy Printing!

Membership

Want to print and sell this design? Purchase Commercial License here

Join

Comment & Rating (73)

@Yannma

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

I like it, it's also beautiful as a lamp

Show original

@AlanS

Cool! What type of light did you put inside? Thanks.

@Yannma

Boosted

Replying to @AlanS :

Thank you It's the Bambu remote-controlled Pucklight

Show original

@robert3433

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent model, easy to print and put together. Looks great. Birds enjoy it too!

@princesssnowowl

love

@HeidiL

Print Profile

0.2mm layer, 2 walls, 15% infill

@10172025

Boosted

the bird feeder printed great. if I can make a couple of suggestions. 1 - add drain holds on the base so the water drains after a rain. I am drilling 4 holes 3/16" diameter in mine. 2 - I glued the sections together but I feel once I add the bird feed the sections might separate during use. especially if a Squirrel gets to it. I added 2 holes in the base and put the rope through the bottom to help hold the weight. Here are 2 of the 4 I am printing now. The red and white feeder has the rope but it is no to the bottom as I planned. The green and white is not glued together right now. I needed some more glue. I finished printing 5 total in different colors. Used paracord to hang. Looks like they are holding together with the Gorilla Super Glue. This was a nice easy print. Colors are PETG, except I used clear PLA for the windows and top.

(Edited)

@TristaGRL

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

This printed out beautifully and all parts fit easily with no adjustments required. I printed several bird feeders from other users and this one was so easy to print and put together. Thank you.

@user_1098824734

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

it is one of my favorite projects, thank you

@user_3589190622

Boosted

Superb design, we love it! Here's a minor suggestion for improvement: Raise the transitions of the central sections slightly to improve adhesion. And add a few drainage holes to the baseplate to allow water to run off in the rain.

Show original

@user_2900542558

I love these, can you tell me how you added the extra window I really like it

@kscwv

Boosted

so I printed this in PETG a while ago and a bear finally got it. he usually comes around at end of March but hadn’t seen him or we would have brought them in. Little one is normal print but has has a couple teeth marks and holes with the lid missing. Big one is 25% scaled up. Both printed great!

@user_3616886401

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed with no problems/issues, everything snaps in place nicely but glued for extra support so it wouldn't snap apart if to heavy due to feed,bird,squirrels "aka" tree rats.

(Edited)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.