hellojoe

0.2mm layer, 2 walls, 20% infill per-object (7 by plate)

captainhagbard

Works great! Thanks! The hole in the middle is really useful for tracks!

SamBuildsStuff

DodoDrone

chborrob

Tobi

Yoshman1984

cover

plate_1.png

NinjDS

IMG_20240916_224047.jpg

It's an optimized layout to allow 7 Spacers to be placed on one plate while printing “by object” and not “by layer”. Printing by object leads to better quality and improved strength.&nbsp;The 20% infill is necessary to insure that there is some strength inside the small empty parts at the bottom. Difference with 0% height is less than a 2 grams for the whole plate.&nbsp;No support needed (the design is clever, it's not mine)&nbsp;You do not have to print walls with Arachne, but I find it somehow more precise.

The models can be printed without supports, but turn the models upside down to print.

Gravitrax Extension, spacer, spacer 10-100mm

ASIA

Print Profile(1)

Description

Comment & Rating (6)

License

Related Models