Search models, users, collections, and posts
Highland Castle - HueForge lithophane
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
3.4 h
1 plate
Open in Bambu Studio
Boost
6
19
2
1
16
5
Released
Description
This HueForge of a castle is a dual front-lit and lithophane (back-lit) print.
Measures 200mm x 200mm.
The included 3MF file will have the colour swaps already set up. Alternatively, use the STL and set up your own filament swaps and settings as per the instructions below.
If you need to resize this print, change only X and Y dimensions. Altering the Z height will mess up the layer colour swaps.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA BambuLab Basic Black Transmission Distance: 0.6
Swap Instructions:
Start with Jade White
At layer #8 (0.72mm) swap to Black for the rest.
Source image generated with AI ∙ March 2024
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (2)