Search models, users, collections, and posts
Support Free/Hardware Free Soft Measure Tape Spool
Remixed by
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
53 min
1 plate
P1 Profile - 0.2mm layer, 2 walls, 15% infill
46 min
1 plate
Open in Bambu Studio
Boost
412
1266
204
73
2.3 k
1.8 k
Released
Description
An enclosed spool for a 13mm (0.5in) wide soft tape up to 150cm (60") comprised of four pieces: an inner and and outer top and bottom.
Assembly Instructions
- Place the inner bottom piece down on a flat surface.
- Fit the outer bottom piece over the inner bottom piece.
- Place the end of your soft tape into the slot on the inner bottom piece.
- Fit the outer top piece in place by pressing it into the matching groove on the bottom piece.
- Place the inner top piece onto the spool assembly, taking care to line up the slot for the end of the soft tape. Press firmly to secure.
NOTE: The pins on the bottom piece often break when attempting to take the inner pieces apart. Do NOT join the inner pieces until final assembly.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (204)