Dry Box PTFE Screw On Lid for PC4-M10
Print Profile(3)
Description
V.2 now has a chamfered screw on lid and PTFE stop
Keep your filament nice and dry whilst in these cereal containers, simply unscrew it and connect the ptfe tube from your printer to the dry box using a PC4-M10 coupler, the part is threaded so you can use PTFE tape and screw in easily.
There is an o-ring to print in TPU to keep it airtight for when not in use. To screw these together you will need to create a hole that is 17-18mm in diameter very carefully by drilling a small hole and then you can trim with cutters to the correct size. If you have a deburring tool that works really well to widen the hole (unless you have an 18mm drill bit of course
Items used….
PC4-M10
CEREAL STORAGE CONTAINERS
You dont need to use these containers yourself but they are a nice fit for bambu rolls.
Have tested this setup with hygrometers inside and it is well sealed pulling the reading down to 10 on the display.
License
Comment & Rating (85)