dberry

cover

plate_1.png

astral prism.webp

plate_1.webp

0.2mm layer, 3 walls, 15% infill

johnDangle

20240616_175215.jpg

2024-07-23_01671c8f7d816

Tweaked the orientation and support settings to hopefully make post-processing easier on you!

Less Supports, 0.16mm High Quality

tolerance 0.1mm

plate_2.png

tolerance 0.2-0.3mm

plate_3.png

Mniam

20251224_173544.jpg

20251224_173554.jpg

20251224_173632.jpg

20251224_173730.jpg

20251224_173916.jpg

I cut provided model into 2 parts, so it can be printed without damaging the bottom part. To connect it I added a pin (with 2 diffrent tolerances: 0.1mm and 0.2-0.3mm), but I still would recommend using an instant glue. If you decided to use 0.1mm pin, its good to firstly push it into one part and, while holding the model, press it against something solid until you hear a distinctive &#34;click.&#34;

model in 2 parts; optimized layer height; with a pin

Baldur's Gate 3 Artefact

An astral Prism form BG3. I'm mostly happy with how mine turned out but the bottom needs some work. You should definitely rethink how the bottom is supported or orientated.

Astral Prism from Baldur's Gate 3

ASIA

Print Profile(3)

Description

Comment & Rating (79)

This remix is based on

License

Related Models