Dewalt drill (DCD800/805/999/1007) bit holders - Free 3D Print Model

Search models, users, collections, and posts

bovineblitz

Tools>Other Tools

IP Report

Print Profile(1)

All

X1 Carbon

H2S

H2C

H2D Pro

X1E

P1S

H2D

A1 mini

P2S

P1P

X2D

A2L

0.16mm layer, 3 walls

Designer

2.6 h

3 plates

4.8(95)

Open in Bambu Studio

Boost

499

1626

121

1.7 k

1.1 k

Released

Description

Made this pair of drill bit holder attachments for my trusty DCD800 since I like having half a dozen bits on me. The DCD800 has the newest design for Dewalt drills along with the DCD805, DCD999, and DCD1007 (see links below for designs that fit other models), so these will work with all of those.

They're contoured to fit snugly and very securely, with an M3 screw (10mm long) and protruding nubs holding them on the same way that the belt clip attaches. Left and right attachments are unique due to the design of the drill. They're actually quite stable without screws entirely. I suggest using a material with some flex like ABS or ASA, but just about anything will work.

I had some pan head M3 screws kicking around so that's what I used in the photos but grabbing some flat headed screws at your local hardware store for a few cents will be even nicer.

**If you have a different Dewalt 20V drill model**, instead of making minor modifications to this design you can use this design, or if you have a 12V, this one.

Comment & Rating (121)

@Keninem

Print Profile

0.16mm layer, 3 walls

I printed these even knowing my model was different. All I had to do was snap off one of the 3 “prongs” that go into the drill. fit nice !!

@wadd_16

I did the same, too a dew seconds to snap of a new of the prongs. DCF787 is my model

@user_991966159

fits with a minor modification on a DCD709. one rail is narrower than the other two, a cut with a utility knife and it's fixed. Remember to use a countersunk screw, otherwise one part is unusable

Show original

@rkarlson007

Print Profile

0.16mm layer, 3 walls

I printed in ABS and it worked very well. Supports were necessary for me on the side struts. Fit perfect on the driver. Thanks

@user_4079795942

Print Profile

0.16mm layer, 3 walls

mixed on which of my tools it will fit on, but should be able to adjust by removing one of the insert tabs to make it work. Thought it came out a bit ugly with stringing, but turned out it only impacted the supports (which popped off nicely)

@niydarx

Boosted

Print Profile

0.16mm layer, 3 walls

Excellent, fits both my DCD800 and DCF850 perfectly.

@J_mods

Print Profile

0.16mm layer, 3 walls

printed beautifully and it’s perfect fit on my drill. thank you!

@SuperRo0t

Print Profile

0.16mm layer, 3 walls

One side is upside down, I know. But printed it in Gold PETG and these are awesome! Thanks for the upload!

@TheRealRobM

excellent!! trimmed one tab off the right one and it mounts on the left of my DCF887 impact! 👍 Thanks!

@djchrishart

Print Profile

0.16mm layer, 3 walls

Print turned out great! After needing to remove one of the tabs, it fit the Dewalt DCD740 perfect! I don’t have any M3 x 10mm, but M3 x 8mm worked just fine!

@Spartacus09

Print Profile

0.16mm layer, 3 walls

Worked on a DCD796 with a little bit of trimming, used 8mm length screws instead of 10 just fine as well.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Drill Dust Collector

YelTrik Designs

43.9 k

17.1 k

Gridfinity Tool Holder for DEWALT Drill (DCD800)

Furious Napkin

Gridfinity drill bits holder

3Dthing

2 k

595

DeWalt Drill Bit Holder | Side-Mount Bit Storage

720

540