Search models, users, collections, and posts
Apple II Floppy Emu Enclosure (][, ][+, //e)
IP Report
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
2.4 h
3 plates
Open in Bambu Studio
Boost
17
20
3
3
38
29
Released
Description
Boost Me (for free)
To create the light pipes to bring the LEDs' light to the front, use a piece of transparent filament. Melt one of the extremities to create a transparent dome (I used a hot air soldering station, but a lighter works too) and fit the filament in the hole, cut it to size, and glue it in place with a drop of super glue (or melt the other side with a soldering iron).
The box is held closed by four 2.5 mm x 12 mm screws.
The filament I used for the top part is eSun ePLA-Matte Light Khaki that almost matches the famous Apple beige (#C2BDB0).
The bottom part is PolyMaker PolyLite PLA Dark Gray Green
The buttons are printed using some random light brown filament I had lying around.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (3)