Bambu X1/P1P/P1S Flush/Poop/Bin/Trash

I designed a detachable waste bin for my P1S. The slope and the waste bin feature a magnetic, detachable design, with a protrusion on the slope for aligning with the screw head under the waste opening.

Magnets required for use:

1. Two pieces of general magnets, 5x2mm.

2. Two pieces of N52 magnets, 10x3mm.

You can customize the magnet positions in the STEP file as needed, but it is still recommended not to replace the 10x3 magnets on the slope, as it may reduce the magnetic strength.

我为我的P1S设计的可分离废料桶。斜坡和废料桶采用磁吸可分离设计，斜坡设计了一个凸点用来与废料口下方的螺钉凹头定位。

需要使用的磁铁：1、5*2的普通磁铁2片；2、10*3的N52磁铁2片。

可自行在STEP文件修改自定义的磁铁孔位，不过依然建议不要替换斜坡的N52 10*3磁铁，否则吸力不够。