Desktop Disc Golf Set
Print Profile(1)
Description
The desktop disc prints with no supports and requires minimal supplies from your local craft store or online(craft store will likely be much cheaper).
Bill of materials:
Eight 23mm cable chain (I used 7mm cable chain)
One keychain ring
One 3/8 inch x 12 inch wooden dowel rod
https://www.amazon.com/Wooden-Unfinished-Hardwood-Sticks-Making/dp/B01BG8A8G0
If you do not want to buy the rod, chains or keyring, I am sure you can print them.
Assembly after connecting the chains is very simple, as shown in the pictures:
1: Pry open segments of cable chain to obtain eight 23mm cable chain strips
2: Attach the pried open cable chain to the inside rings on the top piece
3: Connect ends of all cable chains to the keyring
4: Place the dowel rod in the bottom
5: Slide the basket on the dowel rod
6: Slide the keyring on the wooden dowel rod followed by the top piece
7: Throw discs into basket
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)