Prints OK, some objects should have been rotated 180 around, the clearances are too big which makes the whole thing very wobbly. I will try to remix and upload a print profile.

Skippy

Works perfect for photogrammetry, its a beautiful design!!! (also i aproved this turntable!!!! i win 2 world championships on photogrammetry)

Trendforge3D

Helios

0.2mm layer, 4 walls, 20% infill

The second Plate is missing things to complete the model. Well it there but you will have to duplicate some pieces. Like the stick for the stand. Only two in the slicer and it requires 3. Only 2 thing for the gears but 3 gears

That is very cool. I will definitely use this in my project showcases. Thank you. 

Dante

Antman

rafaelbento96

user_4037650169

Black Sheep Designs

user_3527712780

UniDuni3d

cover

2024-03-18_wtznhint0g9h.png

product spinner.gif

plate_1.png

plate_2.png

IMG_6226.jpeg

The original design had a few flaws:<ul><li>The little table is too thin, at 1mm thickness it was too soft so I made it 2mm thick</li><li>The three holes in the gear that holds the table have too much clearance and the legs were floating inside, I scaled the legs&#39; X/Y dimensions up a little bit for a tight fit that makes the table more stable when rotating.</li><li>The three pins that hold the gears in place were a tad too long and again the holes in the base had too much clearance so I also fatten up the pins and shorten them down a bit to get more stable gear movement</li></ul>Other custom parameters modified from the 0.2mm Strength A1 0.4 nozzle preset:<ul><li>4 walls</li><li>20% cubic infill </li><li>Round items have<ul><li>archimedean top and bottom surface patterns for aesthetic</li><li>Gyroid infill</li></ul></li></ul>

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

3d printed product spinner.Watch the build video! (and subscribe!)<a href="https://youtu.be/jGGnGijQW0o" rel="nofollow">https://youtu.be/jGGnGijQW0o</a>

Print Profile(1)

Description

Comment & Rating (10)

License

Related Models

PRODUCT SPINNER - TURNTABLE 3D

Print Profile(1)

Description

Comment & Rating (10)

License

Related Models