Search models, users, collections, and posts
6.8" Dash for Simracing
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
2.8 h
1 plate
0.2mm layer, 2 walls, 15% infill
1.6 h
1 plate
Open in Bambu Studio
Boost
19
45
2
3
39
4
Released
Description
Build your own DDU
Since buying a DDU is quite expensive I designed and printed my own using a 6.8" VoCore screen and a Pro Micro board.
Parts:
- 1x Vocore 6.8 (old version with micro USB): https://vocore.io/#store
- 1x Arduino Pro Micro: https://www.aliexpress.com/item/1005005921690245.html
- 8x WS2812b 8-bit: https://www.aliexpress.com/item/1005006402666492.html
- 1x USB 2.0 Hub: https://www.aliexpress.com/item/1005001406521390.html
- 3x USB cable (two male, one female): https://www.aliexpress.com/item/1005001603191836.html
- 26 AWG cable: https://www.aliexpress.com/item/1005006249194665.html
- Brass inserts M3 (5 mm x 5 mm): https://www.aliexpress.com/item/1005003582355741.html
- M3 6 mm screw: https://www.aliexpress.com/item/1005005483315023.html
- 10x Neodymium magnets: https://www.aliexpress.com/item/1005006328970925.html
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (2)