Maz 537 3D printed model

Maz-537 has functioning suspension, doors and a removable flatbed.

No slicer supports, except for wheel mounts and beams. All the other parts that need supports have them built in. All the parts fit smaller build plates like Prusa mini. More info in the assembly instructions.

Print settings

• Material: PLA
• Infill: I used 5% for all the parts, but its up to you.
• Perimeters: 2 should be enough.
• Layer height: 0.2 mm
• Supports: There are built in supports except wheel mounts and beams, which must be enabled in the slicer or just use my 3mf files.
• Brim: I used a brim on the frame parts.
• Estimated print time: I use klipper and print quite fast so it took me around 20 hours, but for normal profiles its around 46 hours.
• Used filament: 300 grams