Destiny 2 - The Last Word Hand Cannon - Free 3D Print Model

Search models, users, collections, and posts

jdflute

Shared by

Props & Cosplays>Cosplay Weapons

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 25% infill *gyroid

33.5 h

5 plates

4.8(72)

60% scale for A1mini - 0.12mm layer, 2 walls, 25% infill gyroid

34.1 h

5 plates

4.9(7)

Open in Bambu Studio

982

2582

134

2 k

958

Released

Description

80% scale, 5 plates about 700g filament - 30hrs

I fixed the hinge pin to keep the chamber from falling out of the right side of the gun and also increased the size of the guide pins for a more snug fit

Requires supports, assembly, a spring from a pen for the trigger and glue but its pretty straightforward!

I printed all these parts successfully with this print profile so you shouldn't have to do anything besides hit print ✌️

I used regular filament for the support interface and it turned out great so no need to increase print time with material change

Comment & Rating (134)

@Carreta

A1 mini 0.12 60% scale, had to do some scaling for part that hold ammo chamber and some brushing so it works… was pretty angry while putting spring for trigger, but its finished and it looks awesome. I believe my dad is gonna be happy for such a christmass gift. He does not expect anything. 😊

(Edited)

The designer has replied

@TeddyB

😍 That looks so good! I want you to get credit for the fixes you did to make it work, so you should post it as a new print profile and I'll take my 60% profile down!

@JB.3D

where did you get the stand? I like that

@user_4287667951

I've printed this for my brother,can I ask, where did you source the file for the stand please

@Carreta

Hello, I would like to print this on my A1 mini AMS, do you think its OK to cut model in half, so it fits to my bed size?

The designer has replied

@TeddyB

I think it would work yeah but it would be hard to hide the seams and glue cause you'd have to cut the barrel somewhere. I do like the idea of a print profile for the A1 mini as it would fit at 60% scale instead of 80% (which is almost too big lol) I don't have an A1 for testing but I can upload a new profile at 60% if you'd like to test print it for me? :D

@TeddyB

Replying to @TeddyB :

I think it looks kind of cute smaller lol image for size comparison

(Edited)

@Carreta

Replying to @TeddyB :

This is gonna be present for my father who plays Destiny 2 a lot, so I am really about to print this. Already ordered special filaments for that, so if I can ask you for 60% scale for A1 mini AMS I would be really happy. :-) Edit: I checked barell and TOP (I think this two parts are biggest about long) and I think the biggest scale is 65%. I can place that barell in angle on bed, so can you try i on 0,12mm for 0,4 nozzle and 65% scale for A1 mini AMS?

(Edited)

@henjaminbarris

Incredible print. I agree with a lot of others saying the chamber is really loose and it’s annoying, so I just glued a small 2x8mm magnet to the slug and behind the chamber as shown. Works like a charm to hold it in place at any angle and adds a smooth action to popping the chamber in and out with a mere wrist movement.

(Edited)

@JEST3R

Brilliant solution!

@motob

Excellent model, adjusted some coloring and it printed great!

@Diamivelli

really like the stand! did you make that yourself?

@AlineM

Hello, where did you find the file for the carrier Thank you

Show original

@Jedman

Print Profile

0.2mm layer, 2 walls, 25% infill *gyroid

great print, awesome design. wish it had build instructions. only actual problem is the chamber is extremely loose and couldn't figure out a great solution. not sure if I'm doing something wrong. but as decoration and sitting out, it's great!

@user_1136737066

can it shoot

@Jedman

Replying to @user_1136737066 :

it doesn't shoot actual bullets, no. but it is spring loaded, so you can pull the trigger, feels good!

@JoewithanL

Print Profile

0.2mm layer, 2 walls, 25% infill *gyroid

great print, struggled a little getting the cylinder to not slouch but I'm happy with the result.

@Jedman

Can you advise on what you did to fix slouch? Mine is super loose, hoping I could fix it somehow.

@JoewithanL

Replying to @Jedman :

I'm pretty sure i just used the negative part tool to cut down the hinge like this, so both circles are almost lined up. it'll still slag at some angles but i have it on display so it doesn't really move. you could try resizing the chamber pin too. hope this helps