Tea Light Haunted House
Print Profile(7)
Bill of Materials
Description
*Edit 10/8/23 - Non-AMS Version now available!
This haunted house opens up to allow the addition of an LED tea light candle.
Check out my other holiday models here.
Print Settings & Assembly
The roof requires a very small amount of supports.
AMS Version
House Facade is a 3MF with 2 separate parts. For it to work properly, the windows need to be changed to white or transparent. Once printed, the facade needs to be glued to the case. There is geometry present to aid in alignment. After gluing is complete, just add your light inside and place the roof on top.
Non-AMS Version
The windows need to be printed separately. Once printed, the windows need to be glued to the back of the facade. Then the facade needs to be glued to the case. There is geometry present to aid in alignment. After gluing is complete, just add your light inside and place the roof on top.
The filaments used in the pictures above:
- Bambu Lab Matte Charcoal PLA
- GIANTARM Transparent PLA
Membership
Are you looking for a Commercial License for all JamesThePrinter models?
License
Comment & Rating (467)