Jerusalem: City of Gold

The Old City of Jerusalem's Western Wall, painted with HueForge.

For best results, print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Copper Brown Metallic (Note: I used PolyLite Pro Metallic Bronze Transmission Distance: 1 when modeling this in the HueForge software)
PLA MiKA 3D Silk Gold (Note: I used Overture Silk Gold Transmission Distance: 4 when modeling this in the HueForge software)
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Brown
At layer #7 (0.64mm) swap to Metallic Copper (or PolyLite Metallic Bronze)
At layer #10 (0.88mm) swap to Gold
At layer #12 (1.04mm) swap to Red
At layer #14 (1.2mm) swap to Yellow for the rest.