Armored Core 6 Fires of Rubicon Art - Hueforge Wall Art

PRINT WITH 0 TOP LAYERS, 60/5mm BOTTOM LAYERS!!!

Eyes up Raven, you've got a model to print.

This is a personal favorite among the Hueforge art plates I'm posting here, however it does require a very specific configuration to get it to print correctly. For some reason, printing with even 1 top layer causes the blue-gray to cover up a bunch of the mech's details. Additionally, the Tough Cream White is borderline mandatory to get the misty/foggy effect. Pearlescent whites may work as an appropriate substitute, however.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Dark Blue Transmission Distance: 0.5
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Hatchbox True Pink Transmission Distance: 8.5
PLA PolyLite Yellow Transmission Distance: 11
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Tough Cream White Transmission Distance: 10

Swap Instructions:
Start with Black
At layer #9 (0.88mm) swap to Dark Blue
At layer #12 (1.12mm) swap to Blue Gray
At layer #16 (1.44mm) swap to True Pink
At layer #19 (1.68mm) swap to Yellow
At layer #22 (1.92mm) swap to Gray
At layer #25 (2.16mm) swap to Cream White for the rest.

Want more of my designs and commercial rights to sell prints? Support me on Patreon!