Search models, users, collections, and posts
Magsafe charger stand for iPhone 15/14/13/12
IP Report
Print Profile(4)
0.2mm layer, 6 walls, 25% infill
2.2 h
1 plate
0.16mm layer, 2 walls, 20% infill
3.6 h
1 plate
Archimedean Chords, 4 walls, 4 Top & Bottom shell layers
2.3 h
1 plate
0.2mm layer, 2 walls, 15% infill
4 h
1 plate
Open in Bambu Studio
Boost
110
249
78
4
780
482
Released
Description
Beschreibung
Simple and elegant stand made for the Apple Magsafe charger. Easy to print in place.
Idea
Inspired by the Twelve South Forté stand used by Apple to showcase the new StandBy mode for iOS. I wanted to create the most simple, easy to use and print stand for the magsafe charger and the iPhone.
Two versions
Because I love to have the choice, I created two versions :
- All in one, single piece, ready to be printed in place with no supports and no brim.
- Split version where the base and the head are separate and held together by a screw, allowing you to choose two materials etc. Also easy to print, with recommended brim only for head and screw.
Printing instructions
I recommend printing at 0.2mm, as is. It was specially designed to work without supports.
For the split version, I recommend adding a brim for stability for the head and the screw.
The user shared this model, but is not the original creator of it.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (78)