Ancient Guardian Articulated from Zelda by Crafty Sven

Crafty Sven

Toys & Games>Characters

Print Profile(8)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 10% infill

Designer

2.9 h

1 plate

4.7(247)

AMS 4 colors -0.2mm layer, 2 walls, 10% infill

Designer

13.3 h

1 plate

4.8(36)

0.16mm layer, 2 walls, 15% gyroid infill, no brim

3.5 h

1 plate

5.0(45)

0.2mm layer, 2 walls, 10% infill

3.2 h

1 plate

4.6(46)

Click to see more

Open in Bambu Studio

Boost

1118

1971

435

2.4 k

2.7 k

Released

Description

No supports needed. Make sure that the bed is clean and the first layer adheres properly, glue is recommended.

Good luck and happy printing ! ^-^

I suggest trying the non AMS version 1st to see if you like the design and size.

You can scale this up to 150% !

Comment & Rating (435)

@3DStubeMinden

Print Profile

AMS 4 colors -0.2mm layer, 2 walls, 10% infill

My son freaked out for this ❤️

The designer has replied

@CraftySven

amazing color combination 🧡 thank you !

@tmelsh

Turned out great! Used 3 colors on x1c and took about 13h23m. Doing a 4 color now. This is Bambu solar breeze gradient, marble white, glow in the dark yellow. Used the AMS 4 colors version on textured pei.

@Claw501

Print Profile

AMS 4 colors -0.2mm layer, 2 walls, 10% infill

Scaled down to 80% so I could fit 3 (or 4) and added a brim. Printed great!

@jkc135r

oh wow cool! how long did they take to print?

@Claw501

Replying to @jkc135r :

I believe it was a 16 hour print

@aaron.carey428

Print Profile

0.2mm layer, 2 walls, 10% infill

I’m not sure what happened but it looks like it peeled up from bed and they went crazy!

The designer has replied

@CraftySven

oh no ! sorry to see this 😢 I'm glad your nozzle didn't get messed up. It seems like an adhesion issue. Can be a bit of draft wind that causes this, or curling. A glue does help with this.

@aaron.carey428

since it’s a p1s with door closed it wasn’t a draft but I think it was bed adhesion. I’m going to try again as another print peeled a little and I tried it again with 20 degrees higher bed temperature and it printed much better. I’ll let you know after I try again.

@mcclanelocock12

that happens with me you just need to dry the filament or clean the plate

(Edited)

@Strix

Print Profile

0.2mm layer, 2 walls, 10% infill

it came out near flawless. there was only 3 small parts of the print that came loose during printing on the bottom of the body. that are barely noticeable, but I feel like this fault was more of a printer fault than the print profile and I need to do some maintenance on the lead screws lol. 5 stars! will reprint after maintenance and update.

@eebee

one of mine also fell if so the problem could be in the profile or just bed adhesion

@stevensdr

Boosted

I only have one too

@stevensdr

Boosted

does the head spin?

@brassvr_1432

Boosted

no but there is a remix that someone made that the head spins

@stevensdr

Boosted

Oh, OK.

@user_338235382

Print Profile

P1S specific settings

ahh once again a piece of art, its more ugly than idk, the print failed idk what specific settings these are but they are aqfull

(Edited)

The designer has replied

@NeoBlack

Your rating is unfair and awful; it is not the model or the print profile but a printer or filament issue. This kind of rating needs no one. So many people already printed this model without any issues. Maybe you should think about it before creating such a rating.

(Edited)

@user_338235382

bro i cleaned the bed before and printed the same model with another profile with the same filament so its none of these

@iwantpopcorn

Hi there! Very awesome looking design! I'm just having trouble making it all one color. How do I change the two objects on the outside plate to be the color I want? In my attached screenshot, I set everything to white, but there are still black sections in the preview. How do I fix this? Thank you!

The designer has replied

@iwantpopcorn

Oh actually, I just tried splitting it into parts and was able to set everything to one color. Do you know why I wasn't able to set it to one color before splitting into parts though?

@CraftySven

Thanks. Just press the minus button on the filaments and that will remove them from the current slicing profile.

@SanguinePenguin

Print Profile

AMS 4 colors -0.2mm layer, 2 walls, 10% infill

Color layers are too thin or obscurely placed, making weak wall lines that either don't show up well, or look like errors in details. look at the white/brown edge of the legs, and the brown/black above where the legs connect to the body. Could use a repaint.

The designer has replied

@CraftySven

oh you are right, so sorry about this. I fixed all of this and reuploaded the file.

(Edited)

@user_969511219

Boosted

Really good one :) printed few already and everything was fine, just need to look at poop more often as the filament poop got stuck in shute and stuck to print head and to the tower next to print afterwards :D Slightly recolored the arms as the markings were messed up a little.