Toothbrush Travel Case - Free 3D Print Model

Search models, users, collections, and posts

angrelou

Household>Other House Models

IP Report

Print Profile(9)

All

X1 Carbon

H2S

P1P

X1E

H2D

P1S

H2C

A1 mini

H2D Pro

P2S

X2D

A2L

V 2.5

Designer

1.5 h

3 plates

4.6(180)

V 2.0

Designer

30 min

1 plate

4.8(1.8 k)

V 1.0

Designer

31 min

1 plate

4.7(230)

0.2mm layer, 2 walls, 15% infill

34 min

1 plate

4.6(134)

Click to see more

Open in Bambu Studio

Boost

9181

26137

2647

873

34.6 k

28 k

Released

Description

Update 03/24/2025
Today I uploaded version 3.0, which solves the issue of the hook breaking when closed.

This new version is magnetic and comes in three different sizes (25 mm, 30 mm, and 35 mm) to fit different toothbrushes.

Note: If you're short on time, I recommend downloading the V 2.0 or V 2.5

https://makerworld.com/en/models/1245487-magnetic-toothbrush-travel-case#profileId-1266827

Update 01/01/2026

Hello everyone! Overall, version 2.0 works well, but in many cases the hook tends to break due to filament issues. Because of that, I made version 2.5, which requires super glue to attach the hook to the base.

It’s designed this way so the hook can be printed horizontally, which makes it much stronger, instead of vertically, which doesn’t help much.

I hope this helps, and Happy New Year!

Lately, I've noticed that they always upload the same STL file to all platforms and always encounter the same problem.

I took it upon myself to design a new case that solves the issue all previous models had, which is that they all open too easily.

After several failed attempts, I finally managed to make everything fit perfectly without the need for supports.

At the moment, i only created 3 models, but i will be uploading more models soon

Enjoy the 3D print

As always, have fun, and I'll be uploading more things soon.

(I recommend using pla+)

If you liked the design, check out my profile and subscribe, you won't regret it.

Comment & Rating (2647)

@Linkey

wouldn’t this be bad because of the micro plastic

@Benny_733

toothbrush is made from nylon and plastic... we spit out most anyways. even toothpaste introduces micro plastics.

@luxar

No, but the problem is that FDM prints have micropores (due to how they are printed) which facilitate mold growth

Show original

@purocale

Replying to @luxar :

You are absolutely right.. it's not the microplastics themselves.. it's the bacteria that can accumulate between the micro-gaps

Show original

@xcorella

came out perfectly and works just as intended, great model!! and I really like a good print in place hinge design! awesome

@Aussie_Taipan

Print Profile

V 2.5

everything is really good but the little latch doesn’t work

The profile uploader has replied

@angrelou

You must use super glue.

(Edited)

@user_235953570

Hi, The security lock broke the first time I closed it. I did like the design and how it opens and closes. Thank you!

The designer has replied

@angrelou

I just uploaded V2.0, which helps prevent it from breaking

@user_1724853562

Same for me (version 2). The latch broke on first use. But it still closes (though less securely)

Show original

@vergara_415

Replying to @user_1724853562 :

also had the issue of the V2 version breaking off. still a good print and useful.

@Blsedl

Print Profile

V 1.0

because of layers the pin for locking snapped, fortunately the tolerances are good so it snaps good

The profile uploader has replied

@angrelou

That issue has already been resolved, and I've uploaded a new file and, for the kids, one with superheroes

@Blsedl

Replying to @angrelou :

Good job!👍

@omy.sanjigen

Perfect, it was my first print and I had no problems

Show original

@user_2615332813

@user_826940718

Boosted

Print Profile

V 2.0

Works great! there is more play in the hinges than I had expected but so far so good. It fits my brush reasonably well. I think the hole of the neck of the brush could be smaller. Thanks for the great design!

@Toxin_Labs

Print Profile

V 2.0

Really nice design, printed with bambu pla marble

@mfeidler

I gave it a try on my new P1S and the hinge will not fold. It is stuck together. I wish these type of prints were printed as separate parts and then assembled.

@xcorella

I just printed mine and it works perfectly, did you try to break it in? Most print in place hinges are tough the first time and then smooth, I printed 5 of them all came out perfect on my X1C, I think it may be the way you are printing it, its meant to be print in place not separate

@mfeidler

my printer probably needs some calibration. I tried to break it over but the sides just broke and the hinge did not move. I went ahead and printed a different design that was separate pieces and assembled them with a filament string as the hinge pin.

@user_371863730

Print Profile

V 2.0

great print!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.