Flexi Toad by PLAGROUND

PLAGROUND

Art>Sculptures

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

38 min

1 plate

3.4(57)

0.16mm layer, 2 walls, 15% infill

53 min

1 plate

3.0(4)

Open in Bambu Studio

Boost

236

320

593

541

Released

Description

Print in place flexi Toad for fun!

Comment & Rating (64)

@user_1723420919

Print Profile

0.2mm layer, 2 walls, 15% infill

tried twice the hips broke so I glued them. other than that it's a very nice print.

@nharry24

really like this guy!! I don’t recommend printing it for little kids, but my 4 yr old loved it! I had to size it up a tiny bit and fix the loops on my computer to make sure it wouldn’t break. 4 yr old has had for a month now and still hasn’t broke!! thanks for the cool model!!

@user_2915380201

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Very fast print. This is a good alternative for another benchy print

@Groucho

Print Profile

0.2mm layer, 2 walls, 15% infill

Turned out great. Even did this with a 0.6 mm nozzle and still looks pretty nice.

@apjudd

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed OK - Its a really detailed model and needs to be printed at a fine level or better. Top of the toad's head had some difficulty printing. Other than that, prints fine.

@i3Dprint

Print Profile

0.2mm layer, 2 walls, 15% infill

Strength Issue:Cute print, but the back leg joint is so weak that it breaks easily even just by removing the print from the bed, or from the raft. Needs to be beefed up significantly.

@KBPrintster

Print Profile

0.2mm layer, 2 walls, 15% infill

This print profile has a brim, since this model has very delicate parts removing the brim and supports that end up in the joints makes it easy to break the delicate legs. The file should print fine without using a brim with the proper settings.