Candle Mold
Print Profile(1)
Description
Membership
If you're interested in commercially licensing my models, here it is! If you're simply interested in supporting my projects, you can do that too at a lower price! Thanks in advance
Boost Me (for free)
If you want to support me directly here on makerworld, leave me a boost! THANKS!
OTHER SUPPORT
Leave me a tip to support my work HERE
---------------------------------------------------------------
After printing your mold, insert the wick into its joint, tighten the two pieces of the mold (with the help of a bench vise or clamps), and pour the melted wax.
After a few hours (when the wax is solid) your new candle will be ready.
I didn't use any type of lubricant, the wax came off the piece very easily.
To help you detach the two molds from each other, you can help yourself with a screwdriver by inserting it in the 2 holes on the side.
I tried printing this in PLA and it held up to temperatures, i recommend a fairly high filling.
Candle Diameter: 6cm
---------------------------------------------------------------
Membership
If you're interested in commercially licensing my models, here it is! If you're simply interested in supporting my projects, you can do that too at a lower price! Thanks in advance
Boost Me (for free)
If you want to support me and my models consider leaving a boost, I would be very grateful. Thanks!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (28)