Remix from Printables to fit newer chargers. Holder is 2mm longer. All you need in addition are 2 M3x20 screws with nuts. Buy them from Amazon via this link, if you want to thank me for my effort.
Assembly
Insert the charger plug from the topSqueeze the cable trough the plug holderPull the plug back
Put the plug lid on topUse two M3x20 screws with nuts to mount it to the charger holder. Getting the nut into the top hole can be tricky. A M2x20 also worksTug in the cable and use the noses to fix the cable in the holder
I print 2 in one go. The space for the charger needs to be drilled out a bit. I think there is a difference between Europe and other countries. but I really like the model. No more cable clutter around the charger
I didn't realize we have different style sockets in Poland.
I've had to drill a hole for PE bolt, then super glue the base instead of screwing it.
Anyways, with a little elbow grease I've managed to make it work, lol.
Sehr gut durchdachtes System, einfach im Zusammenbau und hält sehr gut in der Steckdose. Noch besser wäre es wenn es auch für die Unterseite eine Abdeckung gäbe. Ansonsten sehr empfehlenswert!