Milwaukee M18 Blower 2724 Wall Mount by Granite

Granite

Tools>Organizers

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 30% infill, PETG

Designer

3.8 h

1 plate

4.9(52)

0.2mm layer, 3 walls, 30% infill

3.3 h

1 plate

4.9(11)

0.2mm layer, 4 walls, 40% infill

4.8 h

1 plate

5.0(5)

0.28mm layer, 5 walls, 20% Gyroid infill, PETG, 3H55M

3.9 h

1 plate

4.3(4)

Click to see more

Open in Bambu Studio

Boost

149

342

104

543

552

Released

Description

Wall mount for the Milwaukee M18 Blower, Model 2724. Holes sized for #8 drywall screws.

Printed in Polymaker PETG with 3 walls and 30% infill.

Comment & Rating (104)

@mattheller95

Hey mate! print came out awesome in ASA and PLA but Tringle pieces don't fit my Australian model. Is there any chance you could remove the inner triangles for us assies?! cheers matt

The designer has replied

@mattheller95

or reduce them in size slightly?!

@Granite

Replying to @mattheller95 :

I got you! Give me a few minutes and check your message inbox.

@badbugz25

Replying to @mattheller95 :

you can put a modifier cube to do it in the slicer as well, just as an fyi!

@Xxbighmongxx

Print Profile

0.2mm layer, 3 walls, 30% infill

printed out awesome.

The designer has replied

@LongracksLabs

gotta love pla-cf!

@Xxbighmongxx

right!

@lasse1999

Print Profile

0.2mm layer, 3 walls, 30% infill, PETG

excited to try it out

The designer has replied

@Granite

Looks great! Let me know how it goes.

@Longrainrice93

Print Profile

0.2mm layer, 3 walls, 30% infill, PETG

Printed nicely, no issues.

The designer has replied

@Granite

Looks great. I appreciate the feedback. I need to find a red filament that matches the Milwaukee red.

@firefighterogre

Print Profile

0.2mm layer, 3 walls, 30% infill, PETG

Fits perfectly for my blower printed 99% infill and used PLA CF

The designer has replied

@Granite

Holy hell, 99%? You'll be able to hang your car from it. Looks great!

@Girva

Boosted

Finally have a way to get the leaf blower off the ground so I don't have to trip over it, again. Great print, thanks! (Remixed it with the Milwaukee logo and colour.)

The designer has replied

@Granite

It looks great with the logo. I'm glad it worked for you, thanks for giving it a try.

@Its_Xon

Boosted

Printet out so fine, but sadly my EU model dosn't fit the triangles, it's like its a bit too big? Might have the same issue as the guy from Australia :( Please let me know if you got a fix :) Elseway awseome model and work!

@Schwarzy42

Great print! I used Basic PLA from Bambu and it seems to work just fine. Printed in less than 2 hours. No issues with mounting. I think I may have to print one for my dad now!