Ludovica Woven Planter with Drainage and Saucer

Do you want to sell 3D prints of my designs or support my work? Get a commercial license through Patreon 

Ludovica is a 3D-printable planter designed for indoor gardening, combining a rounded silhouette with an open, woven-style outer pattern. Its layered diagonal bands create a lively botanical texture while the smooth inner vessel provides a clean visual contrast, making it an attractive choice for desks, shelves, windowsills, and contemporary home décor.

Highlights

• Distinctive interlaced exterior inspired by woven leaves or basketry
• Rounded, gently tapered form with a reinforced upper rim
• Drainage included for practical plant care
• Separate matching saucer included to sit beneath the planter
• Suitable for indoor plants and decorative gardening displays
• Designed to print without support material

Dimensions

• Width: 108.83 mm
• Depth: 108.83 mm
• Height: 81.97 mm
• Opening: 80 mm

Its compact footprint works well where space is limited, while the patterned shell gives makers an engaging print with plenty of visible detail.

Printing recommendations

The supplied setup uses PLA with a 0.4 mm nozzle and 0.2 mm layer height. Print with two walls and 15% gyroid infill. No supports or build-plate adhesion are required according to the provided settings. Print the planter and saucer, pair them together, and add a small indoor plant to bring Ludovica’s sculptural texture to life.

Check out my 2026 collection 

Pen Holders - Desk Organizer 

Keep Creativity Alive — Donate Here 

A small gesture, a big boost for independent design.